Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Metal project (sawmill)
"AndrewV" wrote:
cross posted RCM and RW Ck'n back in hoping the mind numbing election noise has died down a bit. I'm starting to build a small bandsaw mill so I can mill siding for my shop and make wide plank hardwood flooring for my house (can't afford it unless I make it). I like the plans and parts found @ www.linnlumber.com and plan on buying some parts from them, just the machined stuff I either have everything else in the stock/ scrap heap or can get it local...no sense in shipping steel tubing across the country. Anyway I wanted to hear from the RCM /RW crew on the subject especially if you have some experience. Also I know I could find somebody with a portable mill to come over but I'm so sick of the local talent not showing up (ect.) that I'd rather just do it myself and besides it looks like a neat project. Any Thoughts? Andrew I bought the browning sheaves, bearings, and shafts from him years ago. I see he sells kits now. Uncle and I put something together that works for us. Not a lot of rigidity in our frame so we crib it good so mother earth is the support and pay attention to leveling it. http://wess.freeshell.org/sawmill.html Wes -- "Additionally as a security officer, I carry a gun to protect government officials but my life isn't worth protecting at home in their eyes." Dick Anthony Heller |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Metal project (sawmill) | Woodworking | |||
pyro project w/metal content | Metalworking | |||
Assistance on small metal project? London UK | Metalworking | |||
sheet metal gas engine project | Metalworking |