Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
MIG Welding
On Fri, 17 Oct 2008 07:38:03 -0500, Ignoramus21227
wrote: I am not complaining, as such, the instructor told me that I should have chosen different settings, etc and I am sure that he is right. But, I think, given my low skill etc, I would not trust MIG with anything critical. Probably wise. However, low skill level need not be a permanent condition. Getting good MIG welds is not difficult, it just isn't as easy as it might seem. It does require some practice and experience, like any welding technique. It's particularly easy with MIG to make a "pretty" weld with no strength -- and, with some experience, it isn't difficult to avoid that error. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
welding | Metalworking | |||
welding | UK diy | |||
welding | UK diy | |||
need welding done!! | Metalworking | |||
Welding Aluminum (WAS: Welding Magnesium) | Metalworking |