Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Changing my principles
I have been doing a big "shop reorganization", a project that already
took a few months and will take some more. My shop was not a total mess, but too cluttered due to ebaying and not knowing where is what (mostly minor things like where are certain screws etc, but enough to get ****ed off). So here are my new principles of shop organization. 1. Keep only two things: tools (things to work with) and supplies (things to be used up such as bolts and steel or parts). 2. Do not keep anything for sale and do not buy anything with the purpose of resale. 3. Know where things are. Not knowing where is what means having to buy the same stuff twice, which is the death spiral as it is harder and harder to stop. 4. Keep everything accessible (and not in, say, closed cardboard boxes). 5. Keep tools where they are used the most (basement or garage). 6. Keep all supplies in only place, labeled, reviewed periodically. 7. Do not have more than three projects going on at the same time -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Principles of Direct Current Machines (1923) | Metalworking | |||
EAT value: what are the changing? | Electronics Repair | |||
You would think changing | UK diy | |||
Gable Dormer Design Principles - Where to find? | Home Repair | |||
Changing a loo! | UK diy |