Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Vacuum generator venturi - any made one?
I want to try putting together a quick vacuum generator that runs off
compressed air (run of an 8 gallon tank up to 130 PSI. I'll be using it for desoldering so I think I want a reasonably strong vacuum, but the volume is not all that high. It will probably be used in "burst mode" - with a burst of vacuum for a few seconds being needed intermittently. Heaps of googling and patent searching has turned up lots of commercial products and on or two water powered vacuum generators but not much in the way of pneumatic ones. I'm hoping for a real quick & simple design - any build one or point me to some plans? thanks D. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Other advancements were also being made to improve the durability ofthe wristwatch. The faces were replace with ones made of synthetic plastic.This made them much more durable and resistant to breaking and cracking.Another advancement was in the dial | Electronics Repair | |||
venturi vacuum | Woodworking | |||
venturi vacuum generator plans | Metalworking | |||
very small home made generator, need help | Metalworking | |||
Almost done with my home-made vacuum press. Anyone else done one? | Woodworking |