Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Best way to un-weld pipe?
I've got an old fence I want to salvage some pipe from. It's a two rail fence made out of 2 3/8 drill pipe. I've cut the top rail off of the uprights, but I'm left with a short stub of pipe welded on every 12 feet. I need to cut those off. I can do it with a cutoff wheel and a grinder, but it takes a while. Anybody got a good way to get these off pretty fast? It doesn't have to be that pretty. Thanks! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Solvent weld pipe ? | UK diy | |||
Flexible waste pipe to solvent weld..? | UK diy | |||
JB Weld | Metalworking | |||
Solvent-weld waste pipe | UK diy | |||
Woodworker Want To Weld | Metalworking |