Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
question on bending .040 aluminum on a brake
I need to bend some 6061T6 .040 aluminum that is a U shape, 8" wide
with 2" legs. I wanted to know if I mark exactly the 8" and make the bend will the radius cause the overall width to be less or more than the 8". I dont want to waste material by trying to bend 8" width and then the overall width is either 7 7/8" or 8 1/8", any suggestions? Thanks, Mike |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
aluminum brake work | Home Repair | |||
Bending aluminum bar stock. | Metalworking | |||
Tabletop brake for bending 90's in 1/4" round | Metalworking | |||
INSPIRATION - Bending Brake | Woodworking | |||
bending cast aluminum | Metalworking |