Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
PICTURES -- Lathe transport, cleanup etc (it runs)
Pictures of how I moved it (was not a big deal):
http://igor.chudov.com/projects/Clau...-Transporting/ Pictures of initial cleanup and reassembly: http://igor.chudov.com/projects/Clau...nd-Reassembly/ I just started working on it. The good news is that it seems to run and switch speeds, power feeds etc. The bad news is that it has considerable wear, as far as I could tell. Also what I thought was a on/off/brake lever, does not seem to switch anything so the lathe is on when the speed selector is on. The speed selector has five positions, REV2, REV1, OFF, FWD1, FWD2. I will post a separate question about it. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
PICTURES -- lathe on cart in seller's garage | Metalworking | |||
posting pictures to identify my lathe | Woodturning | |||
Mini lathe semi-mobile stand (pictures) | Woodturning | |||
Chinese mini-lathe factory pictures etc. | Metalworking | |||
Bob Powell? Nice site with pictures on moving his lathe. | Metalworking |