Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
Dumb Question (tm) regarding clothes like poles...
I thought it would be easy to find stuff to make a big "T" gor a clothes line, but... local suppliers don't seem to carry anything but nipples and that up to 1-1/2" only. Is that stiff enough for a clothes line pole with 3 or 4 lines? Richard |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
cavelamb himself wrote:
Dumb Question (tm) regarding clothes like poles... I thought it would be easy to find stuff to make a big "T" gor a clothes line, but... local suppliers don't seem to carry anything but nipples and that up to 1-1/2" only. Is that stiff enough for a clothes line pole with 3 or 4 lines? I don't know. I'd look harder and go with 2 inch black iron pipes. |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
Jim Stewart wrote:
cavelamb himself wrote: Dumb Question (tm) regarding clothes like poles... I thought it would be easy to find stuff to make a big "T" gor a clothes line, but... local suppliers don't seem to carry anything but nipples and that up to 1-1/2" only. Is that stiff enough for a clothes line pole with 3 or 4 lines? I don't know. I'd look harder and go with 2 inch black iron pipes. Aye-Aye. |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
cavelamb himself wrote in
m: Jim Stewart wrote: cavelamb himself wrote: Dumb Question (tm) regarding clothes like poles... I thought it would be easy to find stuff to make a big "T" gor a clothes line, but... local suppliers don't seem to carry anything but nipples and that up to 1-1/2" only. Is that stiff enough for a clothes line pole with 3 or 4 lines? I don't know. I'd look harder and go with 2 inch black iron pipes. Aye-Aye. The ones that are in my yard were made from 4" (possibly galvanized once but occasionally painted) pipe that each have a 1" dia. "staple" welded on to support each end of each of the clothelines. They've been there - cemented - for 50 years and withstood a lot of weight over that time without any indication of "give". Check with your local welding shop to see how much they'd want to make you a set. grin |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
On Jun 30, 12:58*pm, cavelamb himself wrote:
Dumb Question (tm) regarding clothes like poles... I thought it would be easy to find stuff to make a big "T" gor a clothes line, but... local suppliers don't seem to carry anything but nipples and that up to 1-1/2" only. Is that stiff enough for a clothes line pole with 3 or 4 lines? Richard I think Home Depot has 2" but you'd have to check. Karl |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
Instead of a " T " configuration, how about a upside down " U ". A long time
ago my father made one in the U shape with a swing added for the kids. -- Bruce We use the word "politics" to precisely describe our crazy process: "Poli" in Latin means "many" and "tics" means "bloodsucking creatures". "cavelamb himself" wrote in message ... Dumb Question (tm) regarding clothes like poles... I thought it would be easy to find stuff to make a big "T" gor a clothes line, but... local suppliers don't seem to carry anything but nipples and that up to 1-1/2" only. Is that stiff enough for a clothes line pole with 3 or 4 lines? Richard |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
If you use guy wires, you can get away with much smaller tube
diameter. Guy wires convert bending into tension. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
Ignoramus4323 wrote:
If you use guy wires, you can get away with much smaller tube diameter. Guy wires convert bending into tension. They will also clothesline you. |
#9
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
On Jul 1, 11:28*am, Jim Stewart wrote:
Ignoramus4323 wrote: If you use guy wires, you can get away with much smaller tube diameter. Guy wires convert bending into tension. They will also clothesline you. Well it is a clothesline. So wouldn't that be one of the design parameters? Karl |
#10
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
"Ignoramus4323" wrote in message ... If you use guy wires, you can get away with much smaller tube diameter. Guy wires convert bending into tension. Or a truss. Easier to mow around too. Steve |
#11
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
Up North wrote: "Ignoramus4323" wrote in message ... If you use guy wires, you can get away with much smaller tube diameter. Guy wires convert bending into tension. Or a truss. Easier to mow around too. That's a lot of hair, if you have to mow it. -- http://improve-usenet.org/index.html If you have broadband, your ISP may have a NNTP news server included in your account: http://www.usenettools.net/ISP.htm Sporadic E is the Earth's aluminum foil beanie for the 'global warming' sheep. |
#12
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
cavelamb himself wrote:
Dumb Question (tm) regarding clothes like poles... I thought it would be easy to find stuff to make a big "T" for a clothes line, but... local suppliers don't seem to carry anything but nipples and that up to 1-1/2" only. Is that stiff enough for a clothes line pole with 3 or 4 lines? Richard The clothes dryer is on a 30 amp breaker - call it 3kwh dumped into the house as extra heat. The air conditioner has to remove that extra heat - so it runs a lot longer. I'm going to guess I can drop the electric bill by at least 1/3 just by drying towels, sheets and jeans outside. And - stay cooler too. So... Is there an East Side Dallas welder handy? Material costs look like about $75 for a pair of T's. Richard |
#13
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
On Tue, 01 Jul 2008 18:39:09 -0500, cavelamb himself
wrote: cavelamb himself wrote: Dumb Question (tm) regarding clothes like poles... I thought it would be easy to find stuff to make a big "T" for a clothes line, but... local suppliers don't seem to carry anything but nipples and that up to 1-1/2" only. Is that stiff enough for a clothes line pole with 3 or 4 lines? Richard The clothes dryer is on a 30 amp breaker - call it 3kwh dumped into the house as extra heat. The air conditioner has to remove that extra heat - so it runs a lot longer. You don't vent your dryer outside? Plastic flex tubing is better than nothing. The TURKEY I bought this house from used a nylon over the vent into the basement to supplement the furnace in the winter and I'm still finding gobsof lint after 24 years! I'm going to guess I can drop the electric bill by at least 1/3 just by drying towels, sheets and jeans outside. And - stay cooler too. So... Is there an East Side Dallas welder handy? Material costs look like about $75 for a pair of T's. Richard Gerry :-)} London, Canada |
#14
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
Gerald Miller wrote:
On Tue, 01 Jul 2008 18:39:09 -0500, cavelamb himself wrote: cavelamb himself wrote: Dumb Question (tm) regarding clothes like poles... I thought it would be easy to find stuff to make a big "T" for a clothes line, but... local suppliers don't seem to carry anything but nipples and that up to 1-1/2" only. Is that stiff enough for a clothes line pole with 3 or 4 lines? Richard The clothes dryer is on a 30 amp breaker - call it 3kwh dumped into the house as extra heat. The air conditioner has to remove that extra heat - so it runs a lot longer. You don't vent your dryer outside? Plastic flex tubing is better than nothing. The TURKEY I bought this house from used a nylon over the vent into the basement to supplement the furnace in the winter and I'm still finding gobsof lint after 24 years! Of course the dryer is vented outside. But a lot of waste heat doesn't go up the vent. And with 100+ temperatures outside (typical warm Texas afternoon) a little extra heat inside is really noticeable. |
#15
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
cavelamb himself wrote in
m: Of course the dryer is vented outside. But a lot of waste heat doesn't go up the vent. And with 100+ temperatures outside (typical warm Texas afternoon) a little extra heat inside is really noticeable. Roughly, where in Texas are you located? |
#16
Posted to rec.crafts.metalworking
|
|||
|
|||
Clothes line poles
RAM³ wrote:
cavelamb himself wrote in m: Of course the dryer is vented outside. But a lot of waste heat doesn't go up the vent. And with 100+ temperatures outside (typical warm Texas afternoon) a little extra heat inside is really noticeable. Roughly, where in Texas are you located? Hi R^3 Just east of Dallas. Right between Plano and Mesquite. Richard |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Telephone poles | Woodworking | |||
what are those poles called? | UK diy | |||
Rotary Clothes Line spike | UK diy | |||
Fibreglass poles | UK diy | |||
clothes washer under sewer line with ejector pump | Home Repair |