Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Removing bearing if shaft is too long.
I need to remove a bearing from a motor shaft. My Posi Lock puller,
unfortunately, does not have enough reach to grab the bearing because the shaft is too long. Is there something that can be easily done. I did have to make some makeshift tools to remove the pulley, but this is a different case because pulley had holes in the back. -- Due to extreme spam originating from Google Groups, and their inattention to spammers, I and many others block all articles originating from Google Groups. If you want your postings to be seen by more readers you will need to find a different means of posting on Usenet. http://improve-usenet.org/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
10 mm long shaft length tact switches | Electronics Repair | |||
Request for advice regarding cantilevered mounted bearing housing, deflections and shaft stresses | Metalworking | |||
2pt long shaft scrwdrivers | UK diy | |||
A little problem removing a gear from a shaft | Metalworking | |||
A little problem removing a gear from a shaft | Metalworking |