Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
Has anyone tried the Visual Optics video borescope? http://www.voscope.com
I'm looking for a low cost ~$200-300 Borescope that will fit through a 14mm spark plug or O2 sensor hole, and also gearbox drain ports etc. The Ridgid SeeSnake was a possibility, (for about the same price), but it's .7" diameter is a bit too large. Also the lower cost fiber scopes are a possibility, but in this price range the highest fiber count I saw was 7000 fibers, which on the face of it seems lower than the pixtel count on the Visual Optics, plus they are typically only 18" long vs. 36" for the VO. Also the VO has a built in color screen plus video out jack. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Tenma 72-870 NTSC Video Pattern Generator video shifted to right. | Electronics Repair | |||
Can I Record Audio onto the Video Tracks of my VHS Video Recorder? | Electronics Repair | |||
video producer seeking home inspection company to produce how-to video | Home Ownership | |||
S-Video, composite, coaxil video in Question | Electronics Repair |