Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Using ATF as a Way Lubricant
Anyone use ATF as a way lubricant? Someone mentioned on Practical
Machinist that they use it in one of their older manual surface grinders and it is slick as glass. I am not familiar with ATF or its lubrication properties if anyone can shed any light on it for me. I have a Bijur automatic lubricator on my DoAll 6x18. It has Turcite way pads on the ways also. Thanks, Steve |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
T-9 Lubricant | Woodworking | |||
Screw lubricant | Woodworking | |||
Lubricant | Metalworking | |||
QC lubricant? | Metalworking | |||
Silicone lubricant | UK diy |