 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Torque wrench recommendations, please
Hoping to find a ratcheting torque wrench, in either 3/8" or 1/4" drive, with
a range of approximately 10 to 100 inch-pounds. No luck so far -- everything I'm finding that goes down as low as 10 doesn't go any higher than 50. Doesn't really matter whether it's calibrated in inch-pounds or newton-meters. I can do the conversion in my head. If I can just find a wrench with the range I want. TIA... |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Impact wrench torque | Metalworking | |||
| Measuring torque on a motor with a leadscrew with a torque wrench | Metalworking | |||
| Measuring torque on a motor with a leadscrew with a torque wrench | Metalworking | |||
| Torque wrench | UK diy | |||
| What's a torque wrench? | Home Repair | |||
Threaded Mode
