Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Vacuum pump question
OK, I had a good look at it today. It's a Gomco 792 aspirator. It does use
oil after all. I found a box packed with it, with some spares, and a new can of vacuum oil! The parts kit includes a new filter. There is also a manual, that is little more than a brochure. Several of these pumps are currently advertised on the net for around $400.00, so I guess a tool gloat is in order! The pump is apparently a rotary vane type made of cast iron with bronze slides/vanes. Steve R. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Vacuum pump question | Metalworking | |||
Vacuum Pump Question for Chuck | Woodturning | |||
Vacuum pump UNSTUCK -- and question | Metalworking | |||
Vacuum pump UNSTUCK -- and question | Metalworking | |||
Vacuum pump UNSTUCK -- and question | Metalworking |