Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Bridgeport series I milling' machine manual
Bridgeport series I milling machine manual was posted to
alt.binaries.e-book.technical Wednesday 23 January |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Bridgeport series I milling' machine manual
On 2008-01-24, GeorgeD wrote:
Bridgeport series I milling machine manual was posted to alt.binaries.e-book.technical Wednesday 23 January I have it on my website also. http://igor.chudov.com/manuals/Bridgeport/ |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Bridgeport series I milling' machine manual
--Any chance someone's posted the *service* maual?
-- "Steamboat Ed" Haas : The impeachment process Hacking the Trailing Edge! : exists for a reason... www.nmpproducts.com ---Decks a-wash in a sea of words--- |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Bridgeport series I milling' machine manual
|
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Bridgeport series I milling' machine manual
All the documents load fine EXCEPT the maintenance manual.
Since I need to tear down the X axis for some repair work, I'd like to see how much work I'm getting into. Ignoramus2378 wrote: Check out my page, there is a maintenance manual. http://igor.chudov.com/manuals/Bridgeport/ i |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Bridgeport series I milling' machine manual
It finally loaded.
RoyJ wrote: All the documents load fine EXCEPT the maintenance manual. Since I need to tear down the X axis for some repair work, I'd like to see how much work I'm getting into. Ignoramus2378 wrote: Check out my page, there is a maintenance manual. http://igor.chudov.com/manuals/Bridgeport/ i |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Bridgeport series I milling' machine manual
On 2008-01-25, RoyJ wrote:
Ignoramus2378 wrote: Check out my page, there is a maintenance manual. http://igor.chudov.com/manuals/Bridgeport/ [ ... ] All the documents load fine EXCEPT the maintenance manual. I had no trouble with that -- either with Adobe's acroread, or with the unix xpdf -- both displayed it with no trouble. Perhaps your copy got corrupted in downloading? Here is the size (from a unix directory listing): ================================================== ==================== -rw-r--r-- 1 dnichols family 8647229 Jan 24 20:17 bridgeport-ops-maintenance-manual.pdf ================================================== ==================== and (if you are using unix and have the "sum" command available: ================================================== ==================== 32440 16890 bridgeport-ops-maintenance-manual.pdf ================================================== ==================== and the MD5 checksum: ================================================== ==================== MD5 (bridgeport-ops-maintenance-manual.pdf) = 7478391ee7012d480965cb9f495b098c ================================================== ==================== which I think is available for Windows as well. Anyway -- re-download it to see whether that makes a difference. Since I need to tear down the X axis for some repair work, I'd like to see how much work I'm getting into. Try again with the download and see whether that makes a difference. Good Luck, DoN. -- Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bridgeport milling machines. | Metalworking | |||
Drawbar speed handle for Bridgeport milling machine | Metalworking | |||
Need a Lagun Milling Machine FTV-2 Owners manual | Metalworking | |||
For Sale Bridgeport Series 1 CNC mill | Metalworking | |||
Round Ram bridgeport milling machine | Metalworking |