Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 580
Default OT Digital camera mod

In article , Jon Elson
wrote:

nick hull wrote:

The site is too far from any possible computer site, at least 1000'.
That's why I don't use a video camera, too far for co-ax.

Huh? You can send video over miles of coax, if you terminate it
properly. Hmmm, let's see, 1000' at $0.13/ft = $130, you might be able
to do better on eBay. You can probably send the camera power on the
same cable with a little ingenuity, too.


OK, the price is reasonable for the co-ax. There would be some problems
routing & burying it but it's definitely possible. (since I would have
to bury it I can also bury other wires in the same trench) Video
cameras are reasonably cheap, the problem then comes in data processing
inside my home. I do NOT want to watch live video and am most
interested in events that occur when I'm gone or sleeping, so I guess I
would need some gismo that would record when x pixel changes occur.
Does that mean a dedicated computer with a huge hard drive? My present
Mac only has 6 gB, I assume I would have to buy another dedicated
computer and software for the application - what is the software called?

nick

Free men own guns - www(dot)geocities(dot)com/CapitolHill/5357/
  #2   Report Post  
Posted to rec.crafts.metalworking
jk jk is offline
external usenet poster
 
Posts: 385
Default OT Digital camera mod

nick hull wrote:
ome. I do NOT want to watch live video and am most
interested in events that occur when I'm gone or sleeping, so I guess I
would need some gismo that would record when x pixel changes occur.
Does that mean a dedicated computer with a huge hard drive? My present
Mac only has 6 gB, I assume I would have to buy another dedicated
computer and software for the application - what is the software called?



A program called Gotchya! does just that, triggers a few second of
video or snapshots from a web cam, when ever selected areas (you
select them) change by some percent.
http://www.gotchanow.com/
I have used the share ware version.

jk
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Digital Camera Jonni Electronics Repair 2 March 15th 06 12:00 AM
Digital camera repair Virginia Electronics Repair 5 March 8th 05 07:42 AM
Use for digital camera haven't seen documented [email protected] Home Repair 17 December 28th 04 12:37 AM
digital camera repairs? Sam Kaan Electronics Repair 3 August 31st 03 04:00 PM


All times are GMT +1. The time now is 07:58 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"