Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#4
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
nick hull wrote:
In article , Jim Wilkins wrote: On Dec 31, 7:22 am, nick hull wrote: ... It would be a lot easier in a film camera, but the hassle and time delays (and cost) of developing film makes film impractical. Black and white film can be developed in a few minutes without a darkroom. You move it from the camera into the light-tight developing tank inside a black changing bag, then you can pour the developer, stop and fixer in and out under normal indoor lighting. 35mm film is fairly easy to wind onto the reel by feel but I needed some practice with 16mm. I've loaded and developed a lot of B&W film, and I prefer digital ![]() Maybe you could use an old computer for video capture. My Canon doesn't power down when connected to USB. The site is too far from any possible computer site, at least 1000'. That's why I don't use a video camera, too far for co-ax. Free men own guns - www(dot)geocities(dot)com/CapitolHill/5357/ Ever thought about using a video camera with one of the old Rabbit wireless systems? They operate in the 900 Mhz area, if I recall correctly, and with a pair of small beam antenae might cover the distance. If you were a ham radio operator you could use an amateur radio TV setup. That would surely cover the distance. I've gotten several miles out of the one I had with no trouble at all. Jim Chandler |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Digital Camera | Electronics Repair | |||
Digital camera repair | Electronics Repair | |||
Use for digital camera haven't seen documented | Home Repair | |||
digital camera repairs? | Electronics Repair |