Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
WTB - THE WORST VICTOR WELDING TIP YOU GOT
I'm putting together my Gopher Getter, and have come down to the realization
that a welding tip that has been cut would be the quickest easiest way to channel mixed gas from the mixing body. If you have one that is severely toasted, or like a rosebud with a crushed bud that I can cut the tip off, I'll buy it. Only thing is that the nut has to be good so I can screw it on the body. I could also use an extra mixing body if you have an old one. Would keep me from having to hook and unhook. Victor would be best. Just need the Y part with the two valves. e mail me at Steve |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
So *nearly* a Victor Meldrew moment | UK diy | |||
which Victor torch model is the best one to own? | Metalworking | |||
rca victor schematic | Electronics Repair | |||
rca victor turntable | Electronics Repair | |||
Welding Aluminum (WAS: Welding Magnesium) | Metalworking |