Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
How to decide what kind of foundation is required for lathe.
Dear All,
I have a lathe which is to be installed on 4th floor in my lab. I want to know what kind of foundation is required and how to go for it. My vendor suggests he has some readymade rubber foundations available for the same. Will that do. Kindly help. Thanks Santanu |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
How to decide what kind of foundation is required for lathe.
On Wed, 19 Dec 2007 00:32:30 -0800 (PST), with neither quill nor
qualm, santanu quickly quoth: Dear All, I have a lathe which is to be installed on 4th floor in my lab. I want to know what kind of foundation is required and how to go for it. My vendor suggests he has some readymade rubber foundations available for the same. Will that do. Kindly help. What size/weight of lathe? What kind of building? What kind of flooring? Lab? Will you be turning your own test tubes and beakers? snort You guys remind me of the people who used to call up the body shop on the phone and ask for an estimate for the damage to their car. When will people learn to give all the pertinent facts to help others help them? Krikey! -- Seen on a bumper sticker: ARM THE HOMELESS |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
How to decide what kind of foundation is required for lathe.
On Dec 19, 3:32 am, santanu wrote:
Dear All, I have a lathe which is to be installed on 4th floor in my lab. I want to know what kind of foundation is required and how to go for it. My vendor suggests he has some readymade rubber foundations available for the same. Will that do. Kindly help. Thanks Santanu Should be fine. We had a floor made of 2x4 Oak 2" long stood on end and we used steel plates under the base screws to spread the load. The lathe was 15" Colchester and a Hardinge. Did the same with 2 CNC Bridgeports. We were on the 5th floor with classrooms below us. The tablesaw mounted router made the most noise, we only had to close the top of the dutch door and wear hearing protectors when we use it. Our labs moved to different parts of the buildings over the years and we moved to a more central location in the hospital, the basement. When the shop was remodeled we got a floor llike those in jiffy lubes, at least now when you drop a tiny piece you can find it. Yes, labs, on our site there are 3 larger shops and 2 or 3 in labs. In our building, we have 1 large shop, 1 student shop, and another lab shop. ....the glassblowers take care of the glassware, we only will get it when it's time to fit it to the experiment. True to the phrase "something different every day" enat |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
How to decide what kind of foundation is required for lathe.
Seen on a bumper sticker: ARM THE HOMELESS
....they have enough arms....it's the HANDS that are the problem. enat |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
How to decide what kind of foundation is required for lathe.
On Dec 19, 6:13 pm, Larry Jaques
wrote: On Wed, 19 Dec 2007 00:32:30 -0800 (PST), with neither quill nor qualm, santanu quickly quoth: Dear All, I have a lathe which is to be installed on 4th floor in my lab. I want to know what kind of foundation is required and how to go for it. My vendor suggests he has some readymade rubber foundations available for the same. Will that do. Kindly help. What size/weight of lathe? What kind of building? What kind of flooring? Lab? Will you be turning your own test tubes and beakers? snort You guys remind me of the people who used to call up the body shop on the phone and ask for an estimate for the damage to their car. When will people learn to give all the pertinent facts to help others help them? Krikey! -- Seen on a bumper sticker: ARM THE HOMELESS Thanks for ur nice comments anyways.. i didnt had the specs. of the lathe previusly..moreover here are those.. Length: 4.5' and Height of cent 8.5", lathe to be kept on 4th floor of a office complex, concrete flooring. |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
How to decide what kind of foundation is required for lathe.
On Dec 19, 1:32 pm, santanu wrote:
Dear All, I have a lathe which is to be installed on 4th floor in my lab. I want to know what kind of foundation is required and how to go for it. My vendor suggests he has some readymade rubber foundations available for the same. Will that do. Kindly help. Thanks Santanu Lathe specs: length of lathe: 4.5' and height of cent 8.5" to be mounted on 4th floor of a office complex, concrete flooring. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Basement Flooring - Decide What's Best For You | Home Repair | |||
LATHE PART URGENTLY REQUIRED | Woodworking | |||
14" bandsaw, can't decide | Woodworking | |||
what kind of lathe was that? | Woodturning | |||
Trying to decide on a Band Saw. | Woodworking |