Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Substitue Delrin for steel bushing
on a Southbend single tumbler gear box, there are over 7 oil points, with
most of them having Gits oilers. Plus felt wicking to feed oil to internal points. What shaft do you have that isn't getting oil? Getting a little off topic here Eric, What do you lubricate the gear teeth with in the gear box, and for that matter, the end gears also? |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Substitue Delrin for steel bushing
On Mon, 19 Nov 2007 12:52:23 GMT, Dan@ (Dan ) wrote:
on a Southbend single tumbler gear box, there are over 7 oil points, with most of them having Gits oilers. Plus felt wicking to feed oil to internal points. What shaft do you have that isn't getting oil? Getting a little off topic here Eric, What do you lubricate the gear teeth with in the gear box, and for that matter, the end gears also? Shell Tellus 46 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sustitute Delrin for steel bushing | Metalworking | |||
What glue for delrin? | Metalworking | |||
delrin/acetal remelting | Metalworking | |||
substitue for a turned post. | Woodworking | |||
Matte finish on ABS and Delrin? | Metalworking |