 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
rotary phase converters
Hi
I am thinking of getting a rotary phase converter from Temco to drive my Cincinnati mill. In particular I am considering the 6500-11KW or 6500-15KW units. http://www.phaseconverter.com/ Has anyone used these and would care to comment on them. I believe that if I went with these I would have enough to also run a 3ph lathe if I found one I liked. Thanks |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Phase Converters | Metalworking | |||
| Re. Rotary phase converters - magic or myths | Metalworking | |||
| Different RPM Loads on Rotary Phase Converters | Metalworking | |||
| Rotary phase converters | Metalworking | |||
| Phase Converters vs. VFDs | Metalworking | |||
Threaded Mode
