Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Need Advice On Mig/other Welders
I have been thinking of getting a welder for some years but dont know much about them
Understand gas welders are best but the bottles cost £100 each to refill so too expensive - they used to make one with smaller bottles but they dont exist anymore? I dont know the difference between an elextric welder and a MIG electric welder except that the MIG has a wire running through it - why I dont know. Do these perform differently in use or is one better than the other for welding certain things? Can you help me tell the difference?????? Aldi have a MIG welder on offer DC power output of 25amp to 130amp - is this good enough for most jobs?? The MIG wire seems expensive - how long does it last? what does it do? is it like the electrode in the elec welder? Says its cored with flux - doe that help the weld? If anyone can offer any advice or point me in the right direction - would appreciate it - it may save me from paying out on the wrong thing?? HELP Pete |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Need Advice On Mig/other Welders | UK diy | |||
Electra Beckum Mig welders | UK diy | |||
Clarke MIG welders?? | Metalworking | |||
Two $30 MIG Welders | Metalworking | |||
bargain basement mig welders | Metalworking |