Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Heidenhain Dro Problem
Help I have a bp mill with HH 731 DRO . The X axis works fine the Y lights up allright but remains at zero. I have tried swapping the 9 pin connectors around which shows me both scales are working but the Y display refuses to count.Any ideas?
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sony TV - Picture Problem | Electronics Repair | |||
Hot water furnace problem. | Home Ownership | |||
SONY 35" Dual PIP -Video Blackout Problem | Electronics Repair | |||
Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |