Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Greg O
 
Posts: n/a
Default can't pass up usefull trash


"Wayne Cook" wrote in message
...


That's for sure. A long time ago mowers was my main business. Back
when I started out my fixit shop I did a lot of mowers and managed to
make a living as a bachelor. I still do mowers though it's definitely
the low priority part of my business. The fact is about 3/4 of the
time it's possible to make some money on a mower. The problem is that
the other 25% cause such a loss that they eat into the profits of the
good ones real fast.

It's even harder now days since the new mowers are definitely not
built to be worked on. It takes way to much time to get the pretty
plastic decoration pieces off and the carbs are built so cheap that
they're getting hard to do anything with.


Wayne Cook
Shamrock, TX
http://members.dslextreme.com/users/waynecook


I had a small engine repair for five years here in North Dakota. About 1/2
the push mowers you see are throw away machines. I always got a kick out of
people buying the $99 mower down the street, forgeting to put oil in it, or
bending the crank, and then wanting me to fix it. Lets see, crankshaft $45,
two hours labor at $26, (this was a few years back!), gaskets, oil,
whatever, over $100 at any rate! Hell a new 3.5 HP engine from Briggs &
Stratton was $159! Try to explain way a whole mower sells for less than just
the engine!
Once in a while I had people bring in higher quality machines with a bad
engine that they wanted to repair and were willing to pay the price. Down
the srteet I would go to the $99 lawn mower store and buy a mower, strip the
engine off of it and install it on their mower. Even as a dealer I could not
buy a engine that cheap.
I did a ton of small engine repair for consrtuction companies. I was the
only shop in town that would do LP gas powered small engine repair as it was
so differant in the way the engines would run. It was good money as they
would have me fix everything they brought in, no questions.
Still on our 3-1/2 day long summers, it was inpossible for someone to run a
small engine repair and make a living at it. Shops start up every year and a
couple of years down the road they are gone. There is one shop in town that
hass been around for maybe twenty years, but has changed ownership 5-6
times!
I had someone try buy me out once, I told him to pay off my bills and I
would hand him the keys! He would not bite!
Greg


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 03:24 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"