![]() |
can't pass up usefull trash
I'm here to admit my addiction. If i'm driving along and i see a discarded
lawnmower or mechanical something, i have to stop and will most likely take it. I just cant seem to pass up something that can be made to work again in one way or another. Most of my tool carts have old wheels on them that i found thrown away. I have also sold a couple of dozen lawnmowers over the years that needed a little tlc to get them running. How many other people in this newsgroup stop and pick up discarded stuff? walt http://www.nykeglawsucks.com To alcohol! The cause of - and solution to - all of life's problems. -Homer Simpson |
can't pass up usefull trash
"wallster" wrote in message ... I'm here to admit my addiction. If i'm driving along and i see a discarded lawnmower or mechanical something, i have to stop and will most likely take it. I just cant seem to pass up something that can be made to work again in one way or another. Most of my tool carts have old wheels on them that i found thrown away. I have also sold a couple of dozen lawnmowers over the years that needed a little tlc to get them running. How many other people in this newsgroup stop and pick up discarded stuff? walt http://www.nykeglawsucks.com To alcohol! The cause of - and solution to - all of life's problems. -Homer Simpson I too pick up things that I think I can use sometime in the future. Plus, I can't stand to throw anything away. Saving all this "stuff" I'm sure has saved my wallet a ton of money over the years, and the time to drive into town to buy a few bolts or what ever else you need. You ought to see my garage/shop, stuff all over. I see pictures of the nice and neat shops on the web and ask myself, where is all the "stuff". However I've been more and more willing in the last year or so to toss out stuff I haven't used in the past few years. But I still have more stuff than I have room for. I hate this affliction I have. Anyone have any (painless) cures? grin Lane |
can't pass up usefull trash
wallster wrote:
I'm here to admit my addiction. If i'm driving along and i see a discarded lawnmower or mechanical something, i have to stop and will most likely take it. I just cant seem to pass up something that can be made to work again in one way or another. Most of my tool carts have old wheels on them that i found thrown away. I have also sold a couple of dozen lawnmowers over the years that needed a little tlc to get them running. How many other people in this newsgroup stop and pick up discarded stuff? My problem is that once I got a lathe and a mill, every piece of metal I see now looks like "stock" |
can't pass up usefull trash
How many other people in this newsgroup stop and pick up discarded stuff? ALL |
can't pass up usefull trash
Walt , you know you have the habit when friends and family start " finding"
"scraps of intrest" for you and delivering them to you........ in return they claim 24 / 7 welding and machining. "wallster" wrote in message ... I'm here to admit my addiction. If i'm driving along and i see a discarded lawnmower or mechanical something, i have to stop and will most likely take it. I just cant seem to pass up something that can be made to work again in one way or another. Most of my tool carts have old wheels on them that i found thrown away. I have also sold a couple of dozen lawnmowers over the years that needed a little tlc to get them running. How many other people in this newsgroup stop and pick up discarded stuff? walt http://www.nykeglawsucks.com To alcohol! The cause of - and solution to - all of life's problems. -Homer Simpson |
can't pass up usefull trash
After reading about the "salvaged" fire extinguisher exploding in Roy's
face, nearly killing his wife, and knocking his teeth out... I wouldn't stop to pick up a bar of gold bullion any more. I can afford a new fire extinguisher, ratchet strap, army boot, etc... but not a new set of teeth! David "wallster" wrote in message ... I'm here to admit my addiction. If i'm driving along and i see a discarded lawnmower or mechanical something, i have to stop and will most likely take it. I just cant seem to pass up something that can be made to work again in one way or another. Most of my tool carts have old wheels on them that i found thrown away. I have also sold a couple of dozen lawnmowers over the years that needed a little tlc to get them running. How many other people in this newsgroup stop and pick up discarded stuff? walt http://www.nykeglawsucks.com To alcohol! The cause of - and solution to - all of life's problems. -Homer Simpson |
can't pass up usefull trash
past few years. But I still have more stuff than I have room for. I hate this affliction I have. Anyone have any (painless) cures? grin Lane Move. It worked for me. Ron Thompson On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA http://www.plansandprojects.com The ultimate result of shielding men from the effects of folly is to fill the world with fools. --Herbert Spencer, English Philosopher (1820-1903) |
can't pass up usefull trash
How many other people in this newsgroup stop and pick up discarded stuff? ALL Tom is right. You should be asking if there is anyone here who doesn't stop..... John Martin |
can't pass up usefull trash
http://groups.google.com/groups?selm...arthlin k.net
Joel. phx "wallster" wrote in message ... I'm here to admit my addiction. If i'm driving along and i see a discarded lawnmower or mechanical something, i have to stop and will most likely take it. I just cant seem to pass up something that can be made to work again in one way or another. Most of my tool carts have old wheels on them that i found thrown away. I have also sold a couple of dozen lawnmowers over the years that needed a little tlc to get them running. How many other people in this newsgroup stop and pick up discarded stuff? walt |
can't pass up usefull trash
On Fri, 09 Jul 2004 17:30:55 GMT, "Walt Springs"
wrote: Walt , you know you have the habit when friends and family start " finding" "scraps of intrest" for you and delivering them to you........ in return they claim 24 / 7 welding and machining. You know it's bad when a complete stranger comes by trying to find a magneto. I actually had one which I was just going to give to him but he insisted on paying. After looking around my place a little he then pops off saying to come by his place and he'll give me a bunch of stuff. Some of the things he mentioned was a steamer, light plants, plows, etc. Then it got worse. I made a appointment with him for tomorrow. :-) Wayne Cook Shamrock, TX http://members.dslextreme.com/users/waynecook |
can't pass up usefull trash
Wayne Cook wrote in message ... On Fri, 09 Jul 2004 17:30:55 GMT, "Walt Springs" wrote: Walt , you know you have the habit when friends and family start " finding" "scraps of intrest" for you and delivering them to you........ in return they claim 24 / 7 welding and machining. You know it's bad when a complete stranger comes by trying to find a magneto. I actually had one which I was just going to give to him but he insisted on paying. After looking around my place a little he then pops off saying to come by his place and he'll give me a bunch of stuff. Some of the things he mentioned was a steamer, light plants, plows, etc. Then it got worse. I made a appointment with him for tomorrow. :-) Wayne Cook Shamrock, TX http://members.dslextreme.com/users/waynecook wayne, i've visited your shop via your website and you my friend have got some freakin cool **** in there! you're the exact kind of person i was thinking of when i posted this question. walt |
can't pass up usefull trash
"wallster" wrote in message ... I'm here to admit my addiction. If i'm driving along and i see a discarded lawnmower or mechanical something, i have to stop and will most likely take it. I just cant seem to pass up something that can be made to work again in one way or another. Most of my tool carts have old wheels on them that i found thrown away. I have also sold a couple of dozen lawnmowers over the years that needed a little tlc to get them running. How many other people in this newsgroup stop and pick up discarded stuff? walt http://www.nykeglawsucks.com To alcohol! The cause of - and solution to - all of life's problems. -Homer Simpson I do. And I can trump your story. My daughter is a police officer. The sector beat she works surrounds my house. She comes over for lunch a lot, and we watch the grandbaby one day a week, so she comes that day about four times. The other day, she calls me on her cell, and gives me an address where they are tossing out a plastic bubble looking car that has swivelly wheels on it. She asks if I would run over and get it, BECAUSE IT WON'T FIT IN THE BACK OF HER SQUAD CAR! She would have picked it up herself, bit it wouldn't fit. I can see her right now, Glock and all, trying to stuff a yellow and blue bubble car into the back of a squad car. "Now, please cooperate, or I will have to use force .................." I wonder where in the world she got the habit of picking up stuff from............................... Well, I went and snatched it, got it home, and one of the wheels needs attention, and it needs a powerwashing. Kyle is 13 months now, and taking his first steps, so he will be ready for it any time. You bet I pick up stuff curbside. When you used to could take stuff to the dump back in the fifties and sixties, we would sometimes come home with as much stuff as we took. Steve |
can't pass up usefull trash
In article , Wayne Cook says...
You know it's bad when a complete stranger comes by trying to find a magneto. "Complete Stranger," I bet. Sounds like one of those underground magneto rings. Folks sitting around behind closed doors, fondling Fairbanks Morse hardware. I've seen what those kinds of depraved habits can do, given enough time. Next thing you know you'll be mainlining Scintillas. Jim (with a personal thing for Bosch electrics...) PS. Wayne you might want to check your driveway and fenceposts. He probably found the standard hobo's "Good Magnetos Here" symbol chalked there someplace. ================================================== please reply to: JRR(zero) at yktvmv (dot) vnet (dot) ibm (dot) com ================================================== |
can't pass up usefull trash
wallster wrote:
I'm here to admit my addiction. If i'm driving along and i see a discarded lawnmower or mechanical something, i have to stop and will most likely take it. I just cant seem to pass up something that can be made to work again in one way or another. Most of my tool carts have old wheels on them that i found thrown away. I have also sold a couple of dozen lawnmowers over the years that needed a little tlc to get them running. How many other people in this newsgroup stop and pick up discarded stuff? walt http://www.nykeglawsucks.com To alcohol! The cause of - and solution to - all of life's problems. -Homer Simpson Some of the town "refuse collection stations" (That's PC newspeak for "dump")around here have "put 'n take" tables. It's amazing the kind of good stuff lots of technologically deprived folks leave there (particularly in upper middle class towns.) Much of it needing nothing more than a new line cord or a rubber belt to be back in the pink again. I think it's become ndemic to our affluent "throw away" plus "imported goods" society that the price to "buy" a simple repair exceeds the price of a whole new item. My place is in serious danger of breaking through the earth's crust and sinking into the magma from the combined weight of all the stuff I couldn't resist grabbing. G Jeff (Probably the only guy in town whose home has five working electric brooms in it.) -- Jeff Wisnia (W1BSV + Brass Rat '57 EE) "My luck is so bad that if I bought a cemetery, people would stop dying." |
can't pass up usefull trash
SteveB wrote in message news:YuCHc.1361$kt.819@fed1read05... snipped I do. And I can trump your story. My daughter is a police officer. The sector beat she works surrounds my house. She comes over for lunch a lot, and we watch the grandbaby one day a week, so she comes that day about four times. The other day, she calls me on her cell, and gives me an address where they are tossing out a plastic bubble looking car that has swivelly wheels on it. She asks if I would run over and get it, BECAUSE IT WON'T FIT IN THE BACK OF HER SQUAD CAR! She would have picked it up herself, bit it wouldn't fit. I can see her right now, Glock and all, trying to stuff a yellow and blue bubble car into the back of a squad car. "Now, please cooperate, or I will have to use force .................." I wonder where in the world she got the habit of picking up stuff from............................... Well, I went and snatched it, got it home, and one of the wheels needs attention, and it needs a powerwashing. Kyle is 13 months now, and taking his first steps, so he will be ready for it any time. You bet I pick up stuff curbside. When you used to could take stuff to the dump back in the fifties and sixties, we would sometimes come home with as much stuff as we took. Steve i went to the "dump" the other week to get my $18.00 for old gutters and wanted to fill my truck with all the goodies there... there must be a clinical name for this affliction! walt |
can't pass up usefull trash
i went to the "dump" the other week to get my $18.00 for old gutters and
wanted to fill my truck with all the goodies there... there must be a clinical name for this affliction! walt Around here, in Eastern NC, we call it being a "Pack Rat" RJ -- "Have no one say it, and say it to your shame, that all was well here, until YOU came." |
can't pass up usefull trash
Jeff Wisnia wrote:
Some of the town "refuse collection stations" (That's PC newspeak for "dump")around here have "put 'n take" tables. It's amazing the kind of good stuff lots of technologically deprived folks leave there ... I am posting this using a beautiful 21" (!) monitor that someone left at our "put 'n take", aka "swap shed". |
can't pass up usefull trash
Ron Thompson wrote:
past few years. But I still have more stuff than I have room for. I hate this affliction I have. Anyone have any (painless) cures? grin Lane Move. It worked for me. Ron Thompson On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA Oh the pain! michael http://www.plansandprojects.com The ultimate result of shielding men from the effects of folly is to fill the world with fools. --Herbert Spencer, English Philosopher (1820-1903) |
can't pass up usefull trash
wallster wrote:
SteveB wrote in message news:YuCHc.1361$kt.819@fed1read05... snipped I do. And I can trump your story. My daughter is a police officer. The sector beat she works surrounds my house. She comes over for lunch a lot, and we watch the grandbaby one day a week, so she comes that day about four times. The other day, she calls me on her cell, and gives me an address where they are tossing out a plastic bubble looking car that has swivelly wheels on it. She asks if I would run over and get it, BECAUSE IT WON'T FIT IN THE BACK OF HER SQUAD CAR! She would have picked it up herself, bit it wouldn't fit. I can see her right now, Glock and all, trying to stuff a yellow and blue bubble car into the back of a squad car. "Now, please cooperate, or I will have to use force .................." I wonder where in the world she got the habit of picking up stuff from............................... Well, I went and snatched it, got it home, and one of the wheels needs attention, and it needs a powerwashing. Kyle is 13 months now, and taking his first steps, so he will be ready for it any time. You bet I pick up stuff curbside. When you used to could take stuff to the dump back in the fifties and sixties, we would sometimes come home with as much stuff as we took. Steve i went to the "dump" the other week to get my $18.00 for old gutters and wanted to fill my truck with all the goodies there... there must be a clinical name for this affliction! walt We have the "Material Recycling Facility", aka "The MRF". Like short for Murphy. My fingers would not make it typing the list of stuff I've gotten there. Having been fairly regular there, I've often been waved out with "catch ya next time". As if the pricing is not cheap already. Hmm, haven't been over there in awhile... michael |
can't pass up usefull trash
sniipedJeff Wisnia wrote in message news:D5idnfDe8ITYZHPdRVn- Some of the town "refuse collection stations" (That's PC newspeak for "dump")around here have "put 'n take" tables. It's amazing the kind of good stuff lots of technologically deprived folks leave there (particularly in upper middle class towns.) Much of it needing nothing more than a new line cord or a rubber belt to be back in the pink again. I think it's become ndemic to our affluent "throw away" plus "imported goods" society that the price to "buy" a simple repair exceeds the price of a whole new item. My place is in serious danger of breaking through the earth's crust and sinking into the magma from the combined weight of all the stuff I couldn't resist grabbing. G Jeff (Probably the only guy in town whose home has five working electric brooms in it.) -- Jeff Wisnia (W1BSV + Brass Rat '57 EE) "My luck is so bad that if I bought a cemetery, people would stop dying." I think the major reason people chuck stuff is that we take for granted that everyone can fix stuff. My brother is helpless when it comes to any type of repair. If he were to take his 8 year old lawnmower somewhere (if he could find a place that repairs to begin with) by the time he paid for parts and labor, (and waited 2-3 weeks) he would have 75% of a new one paid for. So guys like us snag them by the curb, clean the carb, toss in a plug and change the oil. We sell it for $20-$30. and would already be using his $119.00 brand new murray lawnmower from walmart. I picked up a lawnmower yesterday that was blowing oil. Turns out it had too much oil in it so it was spewing oil out of the exhaust valve. I cleaned her up, changed the oil and the plug, now it runs like a top. That's a lawnmower, try to find anyone willing to try to fix half the stuff out there. It may be shot... or it may be a fuse or loose wire. walt |
can't pass up usefull trash
David Courtney wrote: After reading about the "salvaged" fire extinguisher exploding in Roy's face, nearly killing his wife, and knocking his teeth out... I wouldn't stop to pick up a bar of gold bullion any more. I can afford a new fire extinguisher, ratchet strap, army boot, etc... but not a new set of teeth! Wait a minute! You could get yourself drummed out of this society! Yes, Roy's horrible story sure made an inpression on me, too, and I will be a LOT more careful about picking up anything that might contain pressurized contents, hazardous or corrosive stuff, etc. Especially here in MO (Meth lab country) you have to be REALLY careful about fire extinguishers, as that is the choice container for stolen anhydrous ammonia, which they don't contain well. (I had a cheap 5 Lb Bernzomatic extinquisher explode in my car (thank goodness I wasn't in it at the time) some years ago. The thing was no thicker than a soda can, and the powder load had eaten halfway through the wall.) But, that accident won't stop me from picking up interesting gear, once I have determined it is safe, and bringing it home. (I have almost NEVER actually picked something up on the side of the road, mostly from the standpoint of being rear-ended by a drunk while checking the item out.) I DO, however check out the dumpsters at work very frequently, as people throw the most amazing stuff out, as well as put out usable "junk" for the vultures. I've sold several thousand $ of stuff I had no use for, but figured it was worth something on eBay. I also have made some interesting gadgets, got spares for various gear, misc. metal stock, furniture, etc. My CNC milling machine has a computer monitor/kbd arm, and I got & modified an office chair with a height extension, from this source. My test bench computer is off the loading dock - fully working Pentium 133, which is just fine for what I use it for. I got a fully operational high vacuum pump (Welch 1402) out of the dumpster. I sold a slightly different model on eBay. I got a diffusion vacuum pump and a huge valve off a vacuum chamber, and sold it on eBay. I got a very old Nicolet transient digitizer (early version of digital storage oscilloscope) cleaned the faceplate and sold it for $100 on eBay. I got an HP 54200 (I think that's the model #) digital scope out of the dumpster, it works perfectly, so I kept that! I can't even remember all the other stuff I got, or where I have it hidden! Jon |
can't pass up usefull trash
In article ,
"wallster" wrote: SteveB wrote in message news:YuCHc.1361$kt.819@fed1read05... snipped I do. And I can trump your story. My daughter is a police officer. The sector beat she works surrounds my house. She comes over for lunch a lot, and we watch the grandbaby one day a week, so she comes that day about four times. The other day, she calls me on her cell, and gives me an address where they are tossing out a plastic bubble looking car that has swivelly wheels on it. She asks if I would run over and get it, BECAUSE IT WON'T FIT IN THE BACK OF HER SQUAD CAR! She would have picked it up herself, bit it wouldn't fit. I can see her right now, Glock and all, trying to stuff a yellow and blue bubble car into the back of a squad car. "Now, please cooperate, or I will have to use force .................." I wonder where in the world she got the habit of picking up stuff from............................... Well, I went and snatched it, got it home, and one of the wheels needs attention, and it needs a powerwashing. Kyle is 13 months now, and taking his first steps, so he will be ready for it any time. You bet I pick up stuff curbside. When you used to could take stuff to the dump back in the fifties and sixties, we would sometimes come home with as much stuff as we took. The pricks at our local dump will write you a ticket and throw you out on your ear if they see you pick up so much as a bottle cap. "NO SALVAGING" signs every few feet, a dozen or more "traffic cops" (not actually cops, but they do direct traffic at the edge of the pit) standing around acting like they're guards in a south-african diamond mine, just waiting for somebody to try and make off with the goods. *******s. Had to pass up a nearly spotless "Hero-1" robot (Late 70's Heathkit toy - BIG $$ in it's day, and even if it was trashed, probably worth a hundred bucks or more in salvagable electronic goodies, stepper motors, and similar) someone had dumped last time I was out there. Looked it over, and all I could see obviously missing/damaged was the swivel-wheel and the batteries, and one cap off the keypad. The rest of it looked like it had been assembled, then parked in a closet until it got tossed. Just about the time I figured out exactly what it was and that it would probably be easily fixable, one of the traffic guys moseys over, points at one of the signs, and says "pick it up and get yourself a thousand dollar ticket", then kicks it over the side and down the slope. I couldn't decide whether I wanted to punch the prick and send him down after it, or just stand there and cry as I watched it smash itself to worthless against what looked like an old stove :( Pure "dog in the manger" bull**** is what it was all about. -- Don Bruder - - New Email policy in effect as of Feb. 21, 2004. Short form: I'm trashing EVERY E-mail that doesn't contain a password in the subject unless it comes from a "whitelisted" (pre-approved by me) address. See http://www.sonic.net/~dakidd/main/contact.html for full details. |
can't pass up usefull trash
"Don Bruder" wrote in message ... In article , "wallster" wrote: SteveB wrote in message news:YuCHc.1361$kt.819@fed1read05... snipped I do. And I can trump your story. My daughter is a police officer. The sector beat she works surrounds my house. She comes over for lunch a lot, and we watch the grandbaby one day a week, so she comes that day about four times. The other day, she calls me on her cell, and gives me an address where they are tossing out a plastic bubble looking car that has swivelly wheels on it. She asks if I would run over and get it, BECAUSE IT WON'T FIT IN THE BACK OF HER SQUAD CAR! She would have picked it up herself, bit it wouldn't fit. I can see her right now, Glock and all, trying to stuff a yellow and blue bubble car into the back of a squad car. "Now, please cooperate, or I will have to use force .................." I wonder where in the world she got the habit of picking up stuff from............................... Well, I went and snatched it, got it home, and one of the wheels needs attention, and it needs a powerwashing. Kyle is 13 months now, and taking his first steps, so he will be ready for it any time. You bet I pick up stuff curbside. When you used to could take stuff to the dump back in the fifties and sixties, we would sometimes come home with as much stuff as we took. The pricks at our local dump will write you a ticket and throw you out on your ear if they see you pick up so much as a bottle cap. "NO SALVAGING" signs every few feet, a dozen or more "traffic cops" (not actually cops, but they do direct traffic at the edge of the pit) standing around acting like they're guards in a south-african diamond mine, just waiting for somebody to try and make off with the goods. *******s. Had to pass up a nearly spotless "Hero-1" robot (Late 70's Heathkit toy - BIG $$ in it's day, and even if it was trashed, probably worth a hundred bucks or more in salvagable electronic goodies, stepper motors, and similar) someone had dumped last time I was out there. Looked it over, and all I could see obviously missing/damaged was the swivel-wheel and the batteries, and one cap off the keypad. The rest of it looked like it had been assembled, then parked in a closet until it got tossed. Just about the time I figured out exactly what it was and that it would probably be easily fixable, one of the traffic guys moseys over, points at one of the signs, and says "pick it up and get yourself a thousand dollar ticket", then kicks it over the side and down the slope. I couldn't decide whether I wanted to punch the prick and send him down after it, or just stand there and cry as I watched it smash itself to worthless against what looked like an old stove :( Pure "dog in the manger" bull**** is what it was all about. -- I am saddened whenever I go to the dump. Well, it is a mechanized concrete floor with pits, and semi trucks. Not like the old dump. I see bicycles that could use a tube and a tweak, and rather than some kid who has no bike getting it, it goes down the hole. And the list goes on and on and on and on. Useful items. Things that people who don't have could use. Sad. Steve |
can't pass up usefull trash
On Fri, 09 Jul 2004 18:18:11 GMT, Ron Thompson
vaguely proposed a theory .......and in reply I say!: remove ns from my header address to reply via email No no. When you have a serious junk addiction, moving is NOT painless. past few years. But I still have more stuff than I have room for. I hate this affliction I have. Anyone have any (painless) cures? grin Lane Move. It worked for me. Ron Thompson |
can't pass up usefull trash
On Fri, 09 Jul 2004 17:18:19 GMT, "Tom Gardner"
vaguely proposed a theory .......and in reply I say!: remove ns from my header address to reply via email What ****es me off is that my relatives just refuse (pun intended) to understand! One of them had a self-propelled lawnmower, that stopped for some reason. He left it out on the front lawn on one of those "weave out your wubbish" days, and of course somebody else snaffled it. He was grizzling because they actually came in and said it did not work, could they bring it back if it cost too much to fix! That is the truth. Anyway it served him right..........and so I saw my family remove fomr my sight either a fixable lawnmower, or a pile of gears and bits that could have done.................anything! Then there was my FIL's outboard motor, and an old cement mixer. And some of these were _after_ I put the word out. Tell you how bad I am. One day one of the rellies finally offered me a "deal". It was a fibreglass water tank for $200. Checked the papers. Good price. Except that the thing was a ratty old thin thing, not one of these heavy uteback jobs...............I bought it anyway. Ah well. Hey! I have my wife trained though. She scrounged a heap of that irrigation pipe that's perforated for me! Boy was I proud! There was litte sleep in this house that night I can tell you.........I just sat and stared and stared at that pipe ....G How many other people in this newsgroup stop and pick up discarded stuff? ALL |
can't pass up usefull trash
"Ron Thompson" wrote in message ... past few years. But I still have more stuff than I have room for. I hate this affliction I have. Anyone have any (painless) cures? grin Lane Move. It worked for me. Or die, it worked great for my best friend. Of course, I got the cleanup job. 4 sales for just the small stuff. The last one was a "free flea" where I invited people to just haul the stuff away. I saw cars leaving with frames firmly down to the axle. The whole job represents three months basically missing out of my life. Vaughn |
can't pass up usefull trash
"wallster" wrote in message ... I think the major reason people chuck stuff is that we take for granted that everyone can fix stuff. My brother is helpless when it comes to any type of repair. If he were to take his 8 year old lawnmower somewhere (if he could find a place that repairs to begin with) by the time he paid for parts and labor, (and waited 2-3 weeks) he would have 75% of a new one paid for. So guys like us snag them by the curb, clean the carb, toss in a plug and change the oil. We sell it for $20-$30. and would already be using his $119.00 brand new murray lawnmower from walmart. I picked up a lawnmower yesterday that was blowing oil. Turns out it had too much oil in it so it was spewing oil out of the exhaust valve. I cleaned her up, changed the oil and the plug, now it runs like a top. That's a lawnmower, try to find anyone willing to try to fix half the stuff out there. It may be shot... or it may be a fuse or loose wire. I love fixin stuff. Several of the kids battery powered toys came from a second hand store that had $0.25 Saturday's. I'd buy 2 of the toy and get one to work. When my TV wouldn't present a picture, I did a web search and found several discussions of the model and symptom. They all pointed to the same part. Without even opening the TV, I ran out and bought the chip. That fixed it. I was in a thrift store today that had 2 decent looking mowers for $25. Joel. phx walt |
can't pass up usefull trash
On Fri, 9 Jul 2004 11:58:20 -0400, "wallster"
wrote: I'm here to admit my addiction. If i'm driving along and i see a discarded lawnmower or mechanical something, i have to stop and will most likely take it. I just cant seem to pass up something that can be made to work again in one way or another. Most of my tool carts have old wheels on them that i found thrown away. I have also sold a couple of dozen lawnmowers over the years that needed a little tlc to get them running. How many other people in this newsgroup stop and pick up discarded stuff? Anyone here need 3' of steel pipe, 6"ID 7"OD been rusting behind the shed for about twelve years now. Picked it up alongside the highway one day. Gerry :-)} London, Canada |
can't pass up usefull trash
On Fri, 9 Jul 2004 11:58:20 -0400, "wallster"
wrote: ===I'm here to admit my addiction. If i'm driving along and i see a discarded ===lawnmower or mechanical something, i have to stop and will most likely take ===it. I just cant seem to pass up something that can be made to work again in ===one way or another. Most of my tool carts have old wheels on them that i ===found thrown away. I have also sold a couple of dozen lawnmowers over the ===years that needed a little tlc to get them running. How many other people in ===this newsgroup stop and pick up discarded stuff? === ===walt ===http://www.nykeglawsucks.com ===To alcohol! The cause of - and solution to - all of life's problems. ===-Homer Simpson === === === === === My entire method of making things revolves around trash...................I think even if I hadd all the money in the world necessary to buy whatever it is I needed for a project, I get more fun and enjoyment out of utilizing discarded items or scrounging for them. No I am not a tightwad by any means but "trash" makes the pocket money go a lot further. Visit my website: http://www.frugalmachinist.com Opinions expressed are those of my wifes, I had no input whatsoever. Remove "nospam" from email addy. |
can't pass up usefull trash
Best truckload of 13runs of 'trash' during our 'bulk pickup' last time was 2
snow blowers and a lawn tractor. Cleaned 3 carbs and now have a 6HP/22" sb, 8HP/32" Sb ( John deere) and a Sears LT/10 Lt minus the deck( needed new battery). I hate to gloat, but I FINALLY got some real good stuff! Also got a Hammond Tone Cabinet, mid 60's,solid state 60 watt amp/speaker box. A truly beautiful piece of woodwork, with great sound as well! Can't wait for September for the next runs! j |
can't pass up usefull trash
"Jeff Wisnia" wrote in message ... My place is in serious danger of breaking through the earth's crust and sinking into the magma from the combined weight of all the stuff I couldn't resist grabbing. G LOL, I feel the same way. Like someone else already pointed out, once I owned a lathe and a mill, every little scrap looks like stock inventory. I have a hard time driving by the industrial section of my little town, 'cause there is a metal shop there that throws away some good stuff that I've dragged home. After a while, you just gotta say, enough! Lane |
can't pass up usefull trash
I think the major reason people chuck stuff is that we take for granted
that everyone can fix stuff. My brother is helpless when it comes to any type of repair. If he were to take his 8 year old lawnmower somewhere (if he could find a place that repairs to begin with) by the time he paid for parts and labor, (and waited 2-3 weeks) he would have 75% of a new one paid for. So guys like us snag them by the curb, clean the carb, toss in a plug and change the oil. We sell it for $20-$30. and would already be using his $119.00 brand new murray lawnmower from walmart. I picked up a lawnmower yesterday that was blowing oil. Turns out it had too much oil in it so it was spewing oil out of the exhaust valve. I cleaned her up, changed the oil and the plug, now it runs like a top. That's a lawnmower, try to find anyone willing to try to fix half the stuff out there. It may be shot... or it may be a fuse or loose wire. walt The truth of the matter is that a shop with a labor rate of $50/hr can't do what you and I do. The economics of it isn't there for any potential profit. If you tried to run a business doing what you are doing, you probably wouldn't be able to make a go of it either. Lane |
can't pass up usefull trash
On Fri, 9 Jul 2004 18:56:43 -0700, "Lane"
lane_nospam@copperaccents_dot_com wrote: I think the major reason people chuck stuff is that we take for granted that everyone can fix stuff. My brother is helpless when it comes to any type of repair. If he were to take his 8 year old lawnmower somewhere (if he could find a place that repairs to begin with) by the time he paid for parts and labor, (and waited 2-3 weeks) he would have 75% of a new one paid for. So guys like us snag them by the curb, clean the carb, toss in a plug and change the oil. We sell it for $20-$30. and would already be using his $119.00 brand new murray lawnmower from walmart. I picked up a lawnmower yesterday that was blowing oil. Turns out it had too much oil in it so it was spewing oil out of the exhaust valve. I cleaned her up, changed the oil and the plug, now it runs like a top. That's a lawnmower, try to find anyone willing to try to fix half the stuff out there. It may be shot... or it may be a fuse or loose wire. walt The truth of the matter is that a shop with a labor rate of $50/hr can't do what you and I do. The economics of it isn't there for any potential profit. If you tried to run a business doing what you are doing, you probably wouldn't be able to make a go of it either. That's for sure. A long time ago mowers was my main business. Back when I started out my fixit shop I did a lot of mowers and managed to make a living as a bachelor. I still do mowers though it's definitely the low priority part of my business. The fact is about 3/4 of the time it's possible to make some money on a mower. The problem is that the other 25% cause such a loss that they eat into the profits of the good ones real fast. It's even harder now days since the new mowers are definitely not built to be worked on. It takes way to much time to get the pretty plastic decoration pieces off and the carbs are built so cheap that they're getting hard to do anything with. Wayne Cook Shamrock, TX http://members.dslextreme.com/users/waynecook |
can't pass up usefull trash
On Fri, 9 Jul 2004 15:31:59 -0400, "wallster"
wrote: You know it's bad when a complete stranger comes by trying to find a magneto. I actually had one which I was just going to give to him but he insisted on paying. After looking around my place a little he then pops off saying to come by his place and he'll give me a bunch of stuff. Some of the things he mentioned was a steamer, light plants, plows, etc. Then it got worse. I made a appointment with him for tomorrow. :-) Wayne Cook Shamrock, TX http://members.dslextreme.com/users/waynecook wayne, i've visited your shop via your website and you my friend have got some freakin cool **** in there! you're the exact kind of person i was thinking of when i posted this question. Thanks (I think) :-) Actually I definitely don't take pictures of the vast majority of my junk. It's piled everywhere including two 8'x14' truck boxes, one store bought 8x10' shed, one 10'x30' shed (built by tearing down a old hay barn and reusing the pieces), a 8'x40' insulated reefer box (this was my electronics workroom but is more of a junk room now), and of course any nook and cranny of my 36' x 40' shop which was built from the remains of a old Chevron station building which was blown off it's skids while it was waiting to be moved. Oh yea that doesn't include the piles which are in the other end of the mobile home which is tacked on the back of my house. This end is my office and the kitchen is here while the rest is just storage. Then there's the piles along the cliff behind the house, the piles on the south side of the house, the piles along the north side of the shop, the piles in front of the shop, the..... well you get the idea. :-) Wayne Cook Shamrock, TX http://members.dslextreme.com/users/waynecook |
can't pass up usefull trash
On 9 Jul 2004 12:58:38 -0700, jim rozen
wrote: In article , Wayne Cook says... You know it's bad when a complete stranger comes by trying to find a magneto. "Complete Stranger," I bet. Sounds like one of those underground magneto rings. Folks sitting around behind closed doors, fondling Fairbanks Morse hardware. I've seen what those kinds of depraved habits can do, given enough time. Next thing you know you'll be mainlining Scintillas. Well he was referred here by the local parts store. :-) Jim (with a personal thing for Bosch electrics...) PS. Wayne you might want to check your driveway and fenceposts. He probably found the standard hobo's "Good Magnetos Here" symbol chalked there someplace. What do those symbols look like. I think I need to go chalks some more. :-) Wayne Cook Shamrock, TX http://members.dslextreme.com/users/waynecook |
can't pass up usefull trash
Wayne Cook wrote:
Actually I definitely don't take pictures of the vast majority of my junk. It's piled everywhere including two 8'x14' truck boxes, one store bought 8x10' shed, one 10'x30' shed (built by tearing down a old hay barn and reusing the pieces), a 8'x40' insulated reefer box (this was my electronics workroom but is more of a junk room now), and of course any nook and cranny of my 36' x 40' shop which was built from the remains of a old Chevron station building which was blown off it's skids while it was waiting to be moved. Oh yea that doesn't include the piles which are in the other end of the mobile home which is tacked on the back of my house. This end is my office and the kitchen is here while the rest is just storage. Then there's the piles along the cliff behind the house, the piles on the south side of the house, the piles along the north side of the shop, the piles in front of the shop, the..... well you get the idea. :-) Wayne Cook Shamrock, TX http://members.dslextreme.com/users/waynecook Folks he's telling it truly. I've been there and seen it. :-) ...lew... |
can't pass up usefull trash
I'm with Roy on this one.
They like to charge 25 cents for a bolt, 75 cents for a washer, $1.50 for a half dozen nuts, etc. I've got BOXES of exotic hardware for free from disassembling things - and I use it constantly to build new stuff. Built a small foundry almost entirely from old appliances, scrap, and other wastes. I think it's a good idea to try to use only automotive aluminum for making castings, 356 pours like a dream, but some other alloys are rather nasty. And, a good steam cleaning or powerwash prior to melting would definately increase your yield and more sensible ion general. You can get a ton of great electronic parts, motors, magnets from microwaves, you name it. |
can't pass up usefull trash
On 9 Jul 2004 12:58:38 -0700, jim rozen
calmly ranted: Jim (with a personal thing for Bosch electrics...) That sure beats a Lucas jones. -------------------------------------------- -- I'm in touch with my Inner Curmudgeon. -- http://diversify.com Comprehensive Website Development ================================================== ========== |
can't pass up usefull trash
"Wayne Cook" wrote in message ... That's for sure. A long time ago mowers was my main business. Back when I started out my fixit shop I did a lot of mowers and managed to make a living as a bachelor. I still do mowers though it's definitely the low priority part of my business. The fact is about 3/4 of the time it's possible to make some money on a mower. The problem is that the other 25% cause such a loss that they eat into the profits of the good ones real fast. It's even harder now days since the new mowers are definitely not built to be worked on. It takes way to much time to get the pretty plastic decoration pieces off and the carbs are built so cheap that they're getting hard to do anything with. Wayne Cook Shamrock, TX http://members.dslextreme.com/users/waynecook I had a small engine repair for five years here in North Dakota. About 1/2 the push mowers you see are throw away machines. I always got a kick out of people buying the $99 mower down the street, forgeting to put oil in it, or bending the crank, and then wanting me to fix it. Lets see, crankshaft $45, two hours labor at $26, (this was a few years back!), gaskets, oil, whatever, over $100 at any rate! Hell a new 3.5 HP engine from Briggs & Stratton was $159! Try to explain way a whole mower sells for less than just the engine! Once in a while I had people bring in higher quality machines with a bad engine that they wanted to repair and were willing to pay the price. Down the srteet I would go to the $99 lawn mower store and buy a mower, strip the engine off of it and install it on their mower. Even as a dealer I could not buy a engine that cheap. I did a ton of small engine repair for consrtuction companies. I was the only shop in town that would do LP gas powered small engine repair as it was so differant in the way the engines would run. It was good money as they would have me fix everything they brought in, no questions. Still on our 3-1/2 day long summers, it was inpossible for someone to run a small engine repair and make a living at it. Shops start up every year and a couple of years down the road they are gone. There is one shop in town that hass been around for maybe twenty years, but has changed ownership 5-6 times! I had someone try buy me out once, I told him to pay off my bills and I would hand him the keys! He would not bite! Greg |
can't pass up usefull trash
I have a hard time driving by the industrial section of my
little town, 'cause there is a metal shop there that throws away some good stuff that I've dragged home. And this town would be...? :^) --Glenn Lyford |
All times are GMT +1. The time now is 01:51 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter