Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to rec.crafts.metalworking
MikeMandaville
 
Posts: n/a
Default Steam

Last year I bought a diesel truck, an '83 half-ton Volkswagen Rabbit,
with the idea of rebuilding the engine, and then running it on recycled
cooking oil. Now I am giving serious thought to converting it to
steam.

The idea of being able to power my truck with solid fuel is one which I
find to be greatly appealing. At the time I decided to convert to
diesel, I was looking for an economical means of moving foundry coke
from Alabama to Texas. With a gasoline powered vehicle, the cost of
the gasoline would exceed the cost of the coke by one full magnitude.
Interestingly, for about the first century of their existence, most
steam powered road vehicles which I have read about seem to have run on
coke.

In the nineteen-fifties, the Sentinel truck company sold several
hundred steam trucks to the government of Argentina. These trucks were
used for hauling coal. Of course, these trucks burned part of their
load to power their boilers. I see no reason why the Argentinian
solution should not work for me also.

Any comments?

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Steam Heat Costs [email protected] Home Repair 23 January 18th 06 02:34 AM
Setting steam boiler pressure cutoff JKevorkian Home Repair 6 December 19th 05 03:21 PM
Building a Steam Room Sandy K. Home Repair 1 March 11th 05 08:25 PM
Steam Bending Lumber - Any Good Sites Big John Woodworking 2 December 26th 04 06:30 PM
FAQ - Steambending gregg Woodworking 0 December 26th 04 02:06 PM


All times are GMT +1. The time now is 07:58 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"