Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
ECM
I'm a student of manufacturing engineering in the last term. My
graduating project is about ECM. So, I'm gathering information about the electrochemical machines. I need to find some information such as proper ECM machine, power supply, process parameter control system, and electrolyte preparation, feed and purification system and the other practical and experimental information. Therefore, if possible please assist me in the mentioned subjects. If you are aware of companies with ECM technology and / or aware of application ECM is being applied please respond. |
#2
|
|||
|
|||
ECM
"Arian" wrote in message
om... I'm a student of manufacturing engineering in the last term. My graduating project is about ECM. So, I'm gathering information about the electrochemical machines. I need to find some information such as proper ECM machine, power supply, process parameter control system, and electrolyte preparation, feed and purification system and the other practical and experimental information. Therefore, if possible please assist me in the mentioned subjects. If you are aware of companies with ECM technology and / or aware of application ECM is being applied please respond. ECM applications are very limited today. It may still be used to machine the cooling passages in gas-turbine blades, which once was a major ECM application. Much, or all, of that work was replaced by EDM over 20 years ago. There appears to be some use of ECM in aerospace. You may want to contact Winbro Group Technologies in the UK, who make an ECM machine. Their website is http://www.mjt.uk.com/. Good luck. Ed Huntress |
#3
|
|||
|
|||
ECM
Arian wrote:
I'm a student of manufacturing engineering in the last term. My graduating project is about ECM. So, I'm gathering information about the electrochemical machines. I need to find some information such as proper ECM machine, power supply, process parameter control system, and electrolyte preparation, feed and purification system and the other practical and experimental information. Therefore, if possible please assist me in the mentioned subjects. If you are aware of companies with ECM technology and / or aware of application ECM is being applied please respond. To a lot of us in electronics ECM means Electronic counter measures. When using an abreviation the first time in any writing you should spell it out. ??? ...lew... |
#4
|
|||
|
|||
ECM
Lewis Hartswick wrote:
Arian wrote: I'm a student of manufacturing engineering in the last term. My snip To a lot of us in electronics ECM means Electronic counter measures. When using an abreviation the first time in any writing you should spell it out. ??? Electro-Chemical Machining. Using an electrode and an electrolyte to remove metal from a workpiece. |
#5
|
|||
|
|||
ECM
I believe that ECM was used to make the one piece main upper surface on
747 wings. I saw one in the Boeing Wichita plant back in about 1982 on a tour. Don't know if its still used. I think also I have seen that Rolls Royce have used it for forming turbine blades in the UK. Arian wrote: I'm a student of manufacturing engineering in the last term. My graduating project is about ECM. So, I'm gathering information about the electrochemical machines. I need to find some information such as proper ECM machine, power supply, process parameter control system, and electrolyte preparation, feed and purification system and the other practical and experimental information. Therefore, if possible please assist me in the mentioned subjects. If you are aware of companies with ECM technology and / or aware of application ECM is being applied please respond. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|