Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Good Day Everyone
I am one of the silent ones that read the postings in this newsgroup.....I am building my garage/shop as soon as the snow disappears.Many of you have gone thru this..I am trying to think of what I should plan into this garage before I build it...I am a Machinist and Millwright by trade and I also enjoy woodworking and welding. I am open to all suggestions ....here are a few ...but please feel free to add more.. -what to paint the concrete with? -what type of exhaust system? -which is better drywall or plywood interior ? -different hoist systems? -what seems to be the common electrical requirements? Thats kind of a start...but as I said please feel free to suggest things to put in or do......I finally talked the warden into the size...She was a tough sell but I did it.It will be 28 x 32....the only clause is to save room for her to park her van in the winter.I would like to try and implement improvements to my design before its built and try to have no regrets after its done. Thank You in advance Pete |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
garage rebuilding and party wall agreements (long) | UK diy | |||
Garage supply and new meter? | UK diy | |||
Garage Supply - Spured off house sockets? | UK diy | |||
Building an Extension (Garage and Block Selection) | UK diy | |||
Building a garage above public sewer (UK) | UK diy |