Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Martin H. Eastburn
 
Posts: n/a
Default Three phase analyzer - meter.

http://www.aemc.com/ 3945 Power Quality Analyzers

I dont' have anything to do with this company - however I got an ad in the mail
at work -

Three phase hand held waveform and power quality analyzer. Looks very interesting.

Pdf documents on-line.

# True RMS single-, two- and three-phase measurements at 256 samples/cycle, plus DC
# Real-time color waveforms
# Easy-to-use on-screen setup
# True RMS voltage and current measurements
# Measures DC volts, amps and power
# Display and capture voltage, current and harmonics to the 50th order, including direction in real time
# Phasor Diagram Display
# VA, VAR and W per phase and total
# KVAh, VARh and kWh
# Neutral current display for three-phase
# Transformer K-factor display
# Power Factor displacement PF display
# Captures up to 50 transients
# Short-term flicker display
# Phase unbalance (current and voltage)
# Harmonic Distortion (total and individual)

Looks good - I have not seen the price - suspect it is not hobby level.
--
Martin Eastburn, Barbara Eastburn
@ home at Lion's Lair with our computer
NRA LOH, NRA Life
NRA Second Amendment Task Force Charter Founder

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Does anyone have this gas meter installed in their home? tarquinlinbin UK diy 6 April 22nd 05 10:12 AM
3 phase electrics jacob UK diy 10 May 18th 04 04:46 PM
water meter set aside plans dave @ stejonda UK diy 10 March 19th 04 11:59 PM
General stuff on phase converters Bob Swinney Metalworking 2 November 25th 03 07:51 PM
3 phase 240VAC to 120 VAC single phase? Jack Fisher Metalworking 13 July 16th 03 05:49 PM


All times are GMT +1. The time now is 05:02 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"