Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
How to change diameter of rolled sheet
I have to bend roll a sheet into cylinder using rollers placed in shape
of pyramids. The diameter coming out is quite large so i want to decrease its diameter. How can i do it? I have to change the roller's or readust them or is there any ratio between the roller size and qutcoming diametet. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Happiness: cheapie jigsaw, metal-cutting blade, 2mm ali sheet, neat30cm circle! | UK diy | |||
Basics on Depth of Cuts | Metalworking | |||
Mounting 5/32" X 1/2" long threaded rod in 1/2" sheet steel, 36 times? | Metalworking | |||
Rolled Roofing Blowing Off Manufactured Home, Repair Expensive? | Home Ownership | |||
Ok to apply second rolled roofing over first? | Home Repair |