 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking,alt.machines.cnc
|
|||
|
|||
Vacuum part holding for milling
What's the rule of thumb for amount of vacuum/pressure required to hold
a flat part for milling operations? I need to machine up aluminum and plastic plates. Aluminum plate 4"x4" square flat plastic puck 2.5" round Can anybody point me to some links for low cost DIY alternatives to buying a plate/pump set? TIA, Mike |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2 Part Epoxy vs. One Part for Garage floor? | Home Repair | |||
| Vacuum pump UNSTUCK -- and question | Metalworking | |||
| Friday Challenge - part two | Metalworking | |||
| Part P Proto-FAQ | UK diy | |||
| OT Guns more Guns | Metalworking | |||
Threaded Mode
