Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
M head collet question
I was given an M head with a Rockwell mill I bought, the M head had no
collets. I cut the tang off a MT2 drill to see how it fit (I didn't think it would) and the MT2 is to small it goes up in the spindle a bit. So it looks like this is either a BS 7 taper or perhaps a bridgeport taper. So whats the best way to determine the taper without a bunch of collets to test? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How to best mount certain tooling in Clausing mill with MT#2 spindle? | Metalworking | |||
Bridgeport quill to head clearance? | Metalworking | |||
OT Guns more Guns | Metalworking | |||
Printer | UK diy |