Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Anyone have 5' of 3/8 LP gas hose?
I'm converting a 120-150,000 BTU natural-gas salamander heater to propane.
I've machined a new jet block and have everything now except a length of hose. I need 5-8 feet of propane hose to go from the propane regulator to the heater, but can't find anything locally that's cheap. Any of you guys have a few feet of 3/8 ID surplus Buna-N hose I could scrounge? Perhaps from an obsolete appliance? Theoretically it should be 350 psi bursting pressure, in case the regulator fails. At least that's what McMaster sells for this purpose. Thanks for any help you can provide. -- Bob (Chief Pilot, White Knuckle Airways) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Over-bath shower / tap hose leaks - grrr ! | UK diy | |||
1" flexible hose with threaded ends? | Metalworking | |||
1" flexible hose with threaded ends? | Home Repair | |||
Propane grill hose repair question. | Home Repair | |||
How to fix my garden hose? | Home Repair |