I need a large 304 stainless steel washer, with the following dimensions.

OD 21.5", ID 14.625" Thickness .5". Preferably flame cut, because laser
cutting is a great deal more expensive. So much so that it might get too
expensive for my needs.

Can anyone give me a price quote, or where I should go for this in the San
Francisco Bay Area.

Thanks in advance.

--
Abrasha
http://www.abrasha.com

Abrasha wrote:

I need a large 304 stainless steel washer, with the following dimensions.

OD 21.5", ID 14.625" Thickness .5". Preferably flame cut, because laser
cutting is a great deal more expensive. So much so that it might get too
expensive for my needs.

Can anyone give me a price quote, or where I should go for this in the San
Francisco Bay Area.

Thanks in advance.

--
Abrasha
http://www.abrasha.com

Sounds like an easy job for any shop that has a plasma cutter, CNC or
manual with a circle jig. Plasma is much cheaper than laser and produces
a much better cut than oxy/acet aka flame cut.

Pete C.

"Abrasha" wrote in message
. ..
I need a large 304 stainless steel washer, with the following dimensions.

OD 21.5", ID 14.625" Thickness .5". Preferably flame cut, because laser
cutting is a great deal more expensive. So much so that it might get too
expensive for my needs.

Can anyone give me a price quote, or where I should go for this in the San
Francisco Bay Area.

Thanks in advance.

--
Abrasha
http://www.abrasha.com

you cannot cut stainless with an oxy/acetelyne flame,
must use plasma or laser.

you cannot cut stainless with an oxy/acetelyne flame,
must use plasma or laser.


Or water jet.

I could to that easily. Half inch is on my edge though. Best to find some CNC guy with a 1260 Hypertherm
or such - I am told I can cut 1/2 and messy cut higher.

How perfect are the edges ? - is it a surface flat or is it show stuff.

I could cut and let you clean the edges as needed. Grinding or hammer/flat steel edge rod... :-)

Martin

Martin Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
NRA LOH & Endowment Member
NRA Second Amendment Task Force Charter Founder


Abrasha wrote:
I need a large 304 stainless steel washer, with the following dimensions.

OD 21.5", ID 14.625" Thickness .5". Preferably flame cut, because
laser cutting is a great deal more expensive. So much so that it might
get too expensive for my needs.

Can anyone give me a price quote, or where I should go for this in the
San Francisco Bay Area.

Thanks in advance.


----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

"Abrasha" wrote in message
. ..
I need a large 304 stainless steel washer, with
the following dimensions.

OD 21.5", ID 14.625" Thickness .5". Preferably
flame cut, because laser cutting is a great deal
more expensive. So much so that it might get
too expensive for my needs.

Can anyone give me a price quote, or where I
should go for this in the San Francisco Bay
Area.

Thanks in advance.

--
Abrasha
http://www.abrasha.com

It will have to be plasma or laser cut. You can't
flame cut stainless steel.

Tom

Abrasha wrote:
I need a large 304 stainless steel washer, with the following dimensions.

OD 21.5", ID 14.625" Thickness .5". Preferably flame cut, because
laser cutting is a great deal more expensive. So much so that it might
get too expensive for my needs.

Can anyone give me a price quote, or where I should go for this in the
San Francisco Bay Area.

Thanks in advance.



I meant to say "plasma cut" instead of "flame cut", my bad.

As far as the responses I have received are concerned, with all do respect, I
don't care how it's done.

What I need is a price quote or the name and phone number of a place in the San
Francisco Bay Area that can do this for me. I have not been able to find any
leads yet.

Thanks in advance.

--
Abrasha
http://www.abrasha.com

Abrasha:

Try these guys -- their brochure says they offer both abrasive
water-jet and plasma cutting in the size range you need, for nickel
alloys and stainless steel. They apparently have a San Francisco
office.

http://www.twmetals.com/contact/High...nce_Alloys.pdf

Regards,

Bob

Bob wrote:
Abrasha:

Try these guys -- their brochure says they offer both abrasive
water-jet and plasma cutting in the size range you need, for nickel
alloys and stainless steel. They apparently have a San Francisco
office.

http://www.twmetals.com/contact/High...nce_Alloys.pdf

Regards,

Bob


Thanks, I'll give them a call on Monday.

--
Abrasha
http://www.abrasha.com

What are you making? A bracelet for King Kong?

Regards,

Bob

Bob wrote:
What are you making? A bracelet for King Kong?

Regards,

Bob


I am making a decorative "ceiling flange", to bridge the gap, between a new
stainless steel fireplace flue and the edge of the hole in the wooden ceiling
through which this flue passes.

Here is a before picture. http://www.abrasha.com/misc/ceiling%20gap.htm

Please note, that this is the old flue. It has terra cotta inside of galvanized
steel.

The new flue will be a galvanized steel flue, inside a 14 ga stainless steel
sleeve around which this ceiling flange will be installed. The new flue will
have a smaller diameter than the old one, so the gap in the photo will be wider.

--
Abrasha
http://www.abrasha.com

Abrasha wrote:

I need a large 304 stainless steel washer, with the following dimensions.

OD 21.5", ID 14.625" Thickness .5". Preferably flame cut, because laser
cutting is a great deal more expensive. So much so that it might get too
expensive for my needs.

Can anyone give me a price quote, or where I should go for this in the San
Francisco Bay Area.

Thanks in advance.

--
Abrasha
http://www.abrasha.com

Most good steel supply companys have a plasma burning table to cut
shapes. The cost of cutting at the supplyer I deal with is next to
nothing , probably 5 bucks for cutting the plate you need.

John

John wrote:
Abrasha wrote:

I need a large 304 stainless steel washer, with the following dimensions.

OD 21.5", ID 14.625" Thickness .5". Preferably flame cut, because laser
cutting is a great deal more expensive. So much so that it might get too
expensive for my needs.

Can anyone give me a price quote, or where I should go for this in the San
Francisco Bay Area.

Thanks in advance.

--
Abrasha
http://www.abrasha.com


Most good steel supply companys have a plasma burning table to cut
shapes. The cost of cutting at the supplyer I deal with is next to
nothing , probably 5 bucks for cutting the plate you need.

John


Great.

Do you know of any "good steel supply companies" in the San Francisco Bay Area
that might be able to do just that?

--
Abrasha
http://www.abrasha.com

Abrasha wrote:

John wrote:
Abrasha wrote:

I need a large 304 stainless steel washer, with the following dimensions.

OD 21.5", ID 14.625" Thickness .5". Preferably flame cut, because laser
cutting is a great deal more expensive. So much so that it might get too
expensive for my needs.

Can anyone give me a price quote, or where I should go for this in the San
Francisco Bay Area.

Thanks in advance.

--
Abrasha
http://www.abrasha.com


Most good steel supply companys have a plasma burning table to cut
shapes. The cost of cutting at the supplyer I deal with is next to
nothing , probably 5 bucks for cutting the plate you need.

John

Great.

Do you know of any "good steel supply companies" in the San Francisco Bay Area
that might be able to do just that?

--
Abrasha
http://www.abrasha.com

Nope, only in PA. and thereabouts.

John

Waterjet will give you an extremely nice cut. You can do the washer,
and any holes you need drilled all in one operation. There will be
absolutely no distortion, and the edge will have a nice sand-blasted
finish. It will probably be more expensive than plasma, though.

There are zillions of waterjet shops around. For a list of some of
them, visit:

http://www.waterjets.org/waterjet_jobshops.html

For even more (but you have to phone in), visit:

http://www.omax.com/job_shop_match.html

- Carl.



John wrote:
Abrasha wrote:

John wrote:
Abrasha wrote:

I need a large 304 stainless steel washer, with the following dimensions.

OD 21.5", ID 14.625" Thickness .5". Preferably flame cut, because laser
cutting is a great deal more expensive. So much so that it might get too
expensive for my needs.

Can anyone give me a price quote, or where I should go for this in the San
Francisco Bay Area.

Thanks in advance.

--
Abrasha
http://www.abrasha.com


Most good steel supply companys have a plasma burning table to cut
shapes. The cost of cutting at the supplyer I deal with is next to
nothing , probably 5 bucks for cutting the plate you need.

John

Great.

Do you know of any "good steel supply companies" in the San Francisco Bay Area
that might be able to do just that?

--
Abrasha
http://www.abrasha.com

Nope, only in PA. and thereabouts.

John

I cut some 14 ga 304L today - nice cut. Used 40 amps and there was a little
whisker on the bottom and the normal brown line where it went through the extreme
temps.

It is likely doable with a large enough plasma cutter. Use fine cut (current density!)
the small beam carries all of the current. I had spray 3' long under it - but no
real problem. Nominal edge work is needed - the edge itself is black. Oxide I suppose.
So water jet isn't mandatory - but is a good choice.

Water jet does give some swarf on the edge - not as perfect as most think.
Normally they use man made semi-precious stone - garnet... spinel...

Martin - wish I had one and the building it takes to house.

Martin Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
NRA LOH & Endowment Member
NRA Second Amendment Task Force Charter Founder



Carl wrote:
Waterjet will give you an extremely nice cut. You can do the washer,
and any holes you need drilled all in one operation. There will be
absolutely no distortion, and the edge will have a nice sand-blasted
finish. It will probably be more expensive than plasma, though.

There are zillions of waterjet shops around. For a list of some of
them, visit:

http://www.waterjets.org/waterjet_jobshops.html

For even more (but you have to phone in), visit:

http://www.omax.com/job_shop_match.html

- Carl.



John wrote:

Abrasha wrote:

John wrote:

Abrasha wrote:


I need a large 304 stainless steel washer, with the following dimensions.

OD 21.5", ID 14.625" Thickness .5". Preferably flame cut, because laser
cutting is a great deal more expensive. So much so that it might get too
expensive for my needs.

Can anyone give me a price quote, or where I should go for this in the San
Francisco Bay Area.

Thanks in advance.

--
Abrasha
http://www.abrasha.com


Most good steel supply companys have a plasma burning table to cut
shapes. The cost of cutting at the supplyer I deal with is next to
nothing , probably 5 bucks for cutting the plate you need.

John

Great.

Do you know of any "good steel supply companies" in the San Francisco Bay Area
that might be able to do just that?

--
Abrasha
http://www.abrasha.com

Nope, only in PA. and thereabouts.

John



----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Have you tried Bayshore Metals? I think they have a CC plasma table...
Andy or Steve will be able to let you know.

Regards,

Peter

"Abrasha" wrote in message
. ..
I need a large 304 stainless steel washer, with the following dimensions.

OD 21.5", ID 14.625" Thickness .5". Preferably flame cut, because laser
cutting is a great deal more expensive. So much so that it might get too
expensive for my needs.

Can anyone give me a price quote, or where I should go for this in the San
Francisco Bay Area.

Thanks in advance.

--
Abrasha
http://www.abrasha.com