Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Help Needed Hybco Tap Sharpening Head
Hi,
I recently bought a used Hybco Tap Sharpening Head. Proper operation is a lot less intuitive than I might have expected and I sure could use a manual or some guidance. Strangely, I cannot find a model number, but the serial number is FB3006. The nameplate indicates it was made by Henry P. Boggis & Co., Cleveland, Ohio and that it uses B collets (which I have.) I have emailed the successor company, but have not received a response. I will gladly pay copying costs if anyone has a manual. Anyone use one of these things and have knowledge of proper operation? Thanks, Mill |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Printer | UK diy | |||
Needed: read head for older mini Acu-Rite scale | Metalworking | |||
Shower head bracket? | UK diy | |||
Lathe die head Wanted!! | Metalworking |