Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Swap? Atlas 10F change gears, need 618 gears
I have an Atlas 10F I'm parting out, need accessories for 618 just
acquired. Atlas 10F, have for trade: Carriage, apron & cross slide tailstock bed 36" OAL headstock (babbit, re-poured by PO) reversing box leadscrew Change gears, incomplete set A few other small parts 618: Need rack gearcase for carriage traverse Need change gears steady rest have keyless chuck on MT1 (?) anyone want to trade? -- - - Rex Burkheimer WM Automotive Fort Worth TX |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Swap? Atlas 10F change gears, need 618 gears
Rex, just out of curiosity, what made you decide to keep the 618 and part
out the 10F, rather than the other way around? "Rex B" wrote in message ... I have an Atlas 10F I'm parting out, need accessories for 618 just acquired. Atlas 10F, have for trade: Carriage, apron & cross slide tailstock bed 36" OAL headstock (babbit, re-poured by PO) reversing box leadscrew Change gears, incomplete set A few other small parts 618: Need rack gearcase for carriage traverse Need change gears steady rest have keyless chuck on MT1 (?) anyone want to trade? -- - - Rex Burkheimer WM Automotive Fort Worth TX |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Swap? Atlas 10F change gears, need 618 gears
Andrew H. Wakefield wrote: Rex, just out of curiosity, what made you decide to keep the 618 and part out the 10F, rather than the other way around? Good question. Answer is Relative Condition. The 10F is babbit bearing HS, 36" bed so it's a 10x18 damaged or missing includes: Most of leadscrew drive - gears, harp, end bearings backgear assy countershaft assy carriage crossfeed carriage longitudinal feed gearcase compound casting It was set up with a 2HP DC variable speed motor, which I've separated. Basically, the headstock included the base, the hinged upper cover, spindle, and a 12" pulley on the left driven by the variable-speed motor. It was basically a mess when I got it, although somewhat usable. The 618 is complete, less change gears and maybe a 4-jaw. I've always had a strange affinity for old tabletop metal lathes Probably more than you wanted to know I have other lathes 9" Logan 10x24 Enco Couple of old AA shelf-warmers. Rex "Rex B" wrote in message ... I have an Atlas 10F I'm parting out, need accessories for 618 just acquired. Atlas 10F, have for trade: Carriage, apron & cross slide tailstock bed 36" OAL headstock (babbit, re-poured by PO) reversing box leadscrew Change gears, incomplete set A few other small parts 618: Need rack gearcase for carriage traverse Need change gears steady rest have keyless chuck on MT1 (?) anyone want to trade? -- - - Rex Burkheimer WM Automotive Fort Worth TX |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Swap? Atlas 10F change gears, need 618 gears
Rex B wrote:
I have an Atlas 10F I'm parting out, need accessories for 618 just acquired. Atlas 10F, have for trade: Carriage, apron & cross slide tailstock bed 36" OAL headstock (babbit, re-poured by PO) reversing box leadscrew Change gears, incomplete set A few other small parts Hey Rex, do you have the gear that drives the crossfeed? My power cross feed doesn't work and I think I need a new gear with a good key in it. -- Gary Brady Austin, TX www.powdercoatoven.4t.com |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Swap? Atlas 10F change gears, need 618 gears
"Rex B" wrote in message ... Andrew H. Wakefield wrote: Rex, just out of curiosity, what made you decide to keep the 618 and part out the 10F, rather than the other way around? Good question. Answer is Relative Condition. The 10F is babbit bearing HS, 36" bed so it's a 10x18 damaged or missing includes: Most of leadscrew drive - gears, harp, end bearings backgear assy countershaft assy carriage crossfeed carriage longitudinal feed gearcase compound casting It was set up with a 2HP DC variable speed motor, which I've separated. Basically, the headstock included the base, the hinged upper cover, spindle, and a 12" pulley on the left driven by the variable-speed motor. It was basically a mess when I got it, although somewhat usable. The 618 is complete, less change gears and maybe a 4-jaw. I've always had a strange affinity for old tabletop metal lathes Probably more than you wanted to know I have other lathes 9" Logan 10x24 Enco Couple of old AA shelf-warmers. Rex "Rex B" wrote in message ... I have an Atlas 10F I'm parting out, need accessories for 618 just acquired. Atlas 10F, have for trade: Carriage, apron & cross slide tailstock bed 36" OAL headstock (babbit, re-poured by PO) reversing box leadscrew Change gears, incomplete set A few other small parts 618: Need rack gearcase for carriage traverse Need change gears steady rest have keyless chuck on MT1 (?) anyone want to trade? -- - - Rex Burkheimer WM Automotive Fort Worth TX Won't the AA change gears work on the 6" Atlas or am I confused here? Don Young |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Swap? Atlas 10F change gears, need 618 gears
Don Young wrote: Won't the AA change gears work on the 6" Atlas or am I confused here? Yes, I understand the AA 109 lathes have change gears that are the same as a 618. However, neither of my AAs have change gears. One has a belt-driven leadscrew. The other has no leadscrew drive (109-0701). The first AA that had change gears as the 109-0703. Neither of mine are used at all, just reside on a bookshelf. Rex |
#7
Posted to rec.crafts.metalworking
|
|||
|
|||
Swap? Atlas 10F change gears, need 618 gears
Is your lathe like this?
http://home.earthlink.net/~edspeer1/atlas6.html I don't need this lathe I want to part it out. I have all the change gears and steady. Eddie edspeer1(not "Rex B" wrote in message ... I have an Atlas 10F I'm parting out, need accessories for 618 just acquired. Atlas 10F, have for trade: Carriage, apron & cross slide tailstock bed 36" OAL headstock (babbit, re-poured by PO) reversing box leadscrew Change gears, incomplete set A few other small parts 618: Need rack gearcase for carriage traverse Need change gears steady rest have keyless chuck on MT1 (?) anyone want to trade? -- - - Rex Burkheimer WM Automotive Fort Worth TX |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wooden gears to metal gears. | Metalworking | |||
Jet 1024 lathe change gears - I made my own!! | Metalworking | |||
EMCO V-10 (Compact 10) change gears info needed | Metalworking |