 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
LH internal Threads
Chuck rotation CW (facing it).
Tool bit upside down and on the front side of the lathe. Carriage moving toward tail stock Or Chuck rotation CCW Tool bit upside down and cutting on the back side of the lathe. Carriage moving toward the chuck. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| aligning a welded-on nut with existing threads? | Metalworking | |||
| tapping using short projection npt taps | Metalworking | |||
| Pitch diameter formulas for external vs internal threads | Metalworking | |||
| Cutting Internal Threads 101 | Metalworking | |||
Threaded Mode
