Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
font program for Anilam 1100
I am looking for a program that I can engrave letters and numbers
using my Anilam 1100 control. This is for my home shop so cost is a issue. Thanks, Tim |
#2
|
|||
|
|||
font program for Anilam 1100
I don't know about the anilam code requiremments but I wrote a quick
program to convert Windows TrueType font information into an outline path. This was for an old CNC Beavermill with fanuc controller. I proved it worked then the mill left the next day and never got to use it in anger. I could provide a copy and the source for MS VC 6.0. The type of output it generated is as follows. % :0001 test X-4.7Y-10.1F20 Z-20.0 Y-41.0 X-9.1 Z0.0 % The :0001 is a program number "test" is here the contents of a file containing header information used for initialisation and I don't have it any more so this would need to be sorted. Dro Guy wrote: I am looking for a program that I can engrave letters and numbers using my Anilam 1100 control. This is for my home shop so cost is a issue. Thanks, Tim |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Zanussi washing machine - blown program selector | UK diy |