Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Valve question
A certain valve has a rating of 29"/hg. What is the P.S.I. Equiv. of
this? Was the valve rated for vacuum and not pressure? Just need to know before I buy some of these. If in fact the valve was made for a vacuum system,will it function(on air) with the equiv pressure(That I am hoping one of you folks can tell me). I just need them for 20 lbs of air pressure. Thanx, Mark |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Plastic water valve question ...again | Home Repair | |||
Heating Relief Valve and Motorised Valve - Bit Long | UK diy | |||
Thermocouple / gas valve question ? | UK diy | |||
New flat - radiator valve question | UK diy | |||
moving water main valve | Home Repair |