Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
FA: continuous run compressor unloader - someone was looking for one of these a month or two ago
here's the link, starting bid is $9.99, buy it now at 28
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=7588616307 Load Genie Continuous Run Unloader Control - Control Devices Brand, St Louis, MO. Instructions are included. The box the unit is in has gotten wet, the unit is undamaged and sure looks like it was never used. The side of the box is numbered 5X709. Sold as is because I can't test it, but I certainly can't see anything wrong with it. Quoting from the instruction sheet: "The Mark II LOAD GENIE is a self contained, automatic, continuous run unloader and check valve." How it works When comressed air in the tank has reached the factory preset pressure, hte control will unload the compressor through the vent port. When air has been used from the Tank, and pressure drops, the Mark II control will permit the compressed air to be pumped into the tank again. Bill www.wbnoble.com to contact me, do not reply to this message, instead correct this address and use it will iam_ b_ No ble at msn daught com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Nomination - Vito Kuhn for Kook of the Month (was: Vito Kuhn Unauthorised Mini-FAQ) | Woodworking | |||
OPTION ARM EXPLAINED: Pay what you want each month mortgage. | Home Ownership | |||
Continuous gas hot water. | Home Repair |