Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Metal Stand
I was thinking of building my own aquarium stand, using 1.25" square
tube .110 wall thickness I would do a top / bottom complete frame which would be supported by 6 legs, 2 on each end 2 in the center, plus angled pieces on the top corners as well as back / front supports.... Anyone have any idea what kind of weight this would support? final size would be 85 1/4"l x 24"w x 32"h From what i have seen most of these stands are just made with 1 1/4" ..100 angles. Thanks |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ground Rod For House ? | Home Repair | |||
Getting started in metal crafts? | Metalworking | |||
Attaching wooden lats to a metal balcony rail | Woodworking | |||
Earth Bondng | UK diy | |||
stand for Nova DVR | Woodturning |