 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
0.063 inch 6061 for control panel?
Hello all,
I am assembling parts lists for my latest technologial mischief, and gather that a nice way to make arrays of DB9 etc. holes is to use 0.063 inch Aluminum. Is 6061 ok? I assume so, but would rather hear any concerns in advance rather than after learning the hard way. Thanks! Bill |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Opinions sought on 4 inch rotary tables | Metalworking | |||
| Washing machine drain backs up! | Home Repair | |||
| Big threads with 1-1/2 inch Beall Thread cutter | Woodworking | |||
| When Is A Half Inch Dowel Not A Half Inch Dowel? | Woodworking | |||
Threaded Mode
