Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Electrical problems at home related to RPC
In article , Ignoramus18851 says...
There are some intermittent problems at home related to me starting my RPC. Large rotary converters will draw large currents during startup unless spun to speed first. Consider a pony motor. Also be sure your neutral at the panelboard isn't getting loose. Strange things can happen if this occurs. Jim -- ================================================== please reply to: JRR(zero) at pkmfgvm4 (dot) vnet (dot) ibm (dot) com ================================================== |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Home electrical problem | Electronics Repair | |||
Home Insurance pay for electrical upgrade? | Home Ownership | |||
new home problems | Home Repair | |||
Home Depot Scorns Christian Groups | Woodworking |