Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Blueing products
I'm about to make some welded square tube picture frames and have been
looking into various blueing products. 44/40 runs about $8.50 for 2 oz. Oxpho-blue runs about $9.50 for 4 oz. Van's Instant is about $10 for 4 oz. Hoppes runs about 9$ for 4 oz. I'm wondering what folks here have found to work best on mild steel. Any hints or tricks? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
kroil | Home Repair | |||
OT-Carter Products celebrates 75 years serving the woodworking industry | Woodworking | |||
FS: Semiconductor Data Books | Electronics Repair | |||
Pre-cancelling mixer products (DAC sample selection) | Electronics | |||
ML Campbell Finishing Products | Woodworking |