Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.machines.cnc,misc.survivalism,rec.crafts.metalworking
|
|||
|
|||
CNCing a new case for the Constitution
On Thu, 29 Dec 2005 11:08:00 GMT, ff wrote:
Anyone else see the show on PBS about making new cases for the Constitution, Declaration of Independence and Bill of Rights? Yep. But as it was PBS no wingers were watching I gather. Not that they seem to like those bits of paper anyway. It included a short but very cool segment on machining the cases out of, get this, _solid titanium_. In one operation they were using a hexapod cnc and another op was facing the front perfectly flat in a great huge cnc lathe using PCD tooling. The idea is the glass cover will seal perfectly against the metal with no o-ring. The whole assembly gets filled with argon gas for preservation of the documents. They destructively tested one unit in a vacuum chamber, drawing the pressure down until the glass broke in the middle, but the seal never leaked. Must be a cool place to work, where it seems cost is no object. Fred Think they can keep bush & the neocons out of the case that way? I sort of doubt it. -- Cliff |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Gunner's medical bills | Metalworking | |||
HD foam for laptop case? | UK diy | |||
Plan Request: Glass Display Case | Woodworking | |||
cabinet case material - uv plywood | Woodworking | |||
Sawdust inside carrying case of new PC 557? | Woodworking |