 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
gwm rotary ph conv ?
i am hooking up a G W M rotary phase converter, and i am having a problem
understanding the wiring diagram. it looks like you have to splice into( 1) 220 wire and connect it to L 1 in the convertor , and do the same with the other wire and hook to L2 . then run a 3rd leg from T3 out to the machine with the other 2 original wires . does this sound right thanks walter |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Phas a matic Rotary Converter Rip Off? | Metalworking | |||
| Rotary tool (Dremel) flex-shaft lubricant? | Metalworking | |||
| Rotary tank - how to build? | Metalworking | |||
| Chicago Electrics Rotary Hammer Drill Review | Metalworking | |||
| Cutting pullies on a rotary table on a mill | Metalworking | |||
Threaded Mode
