Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Boring head dumb question
Hello all,
I have been looking at $80-100 import boring head/bar sets. For that money, I would not expect to start rebuilding V12 engines, but it would hopefully teach me a little and tolerate abuse as an adjustable hole saw. Is that a reasonable expection? Boring heads appear to be sold by diameter, with no mention of capacity. Some searching and reading leads me to suspect that one can mount the bar parallel or perpendicular to the axis of rotation, with the latter allowing larger holes to be bored. Is that accurate? Any cautions or advice? Bill |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Dumb door question... | Home Repair | |||
Cleaning VCR - need help and a diagram | Electronics Repair | |||
Dividing head question | Metalworking | |||
Printer | UK diy | |||
GYYR question? Head replace "timer reset" | Electronics Repair |