Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Bending wire
Seeking good advice, opinions, anecdotes or full-on rants about forming
an eye, about 1/4 inch inner diameter, at the end of some 3/16" stainless wire. I'm guessing some sort of simple jig should do it, but fooling around with some nails hammered into a piece of wood succeeded only in convincing me that I'm fairly thick. -- Ted Bennett Portland OR |
Thread Tools | Search this Thread |
Display Modes | |
|
|