 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Help with HF 14" x 40" lathe
Jan
This lathe has a lot more electrics then I would have expected. Without a manual, it is gonna be tough. The model number on the data plate is TD-12368. With a date of 1994. HF has discontinued this model and offers no help. Does anyone have a manual to sell or loan? Or any ideas on a source? I bought a new lathe recently and it has relays that are controlled by switches. The relays do the actual switching. You probably have trouble in the relays and possibly the motor is incorrectly wired. You do need to make sure all is well before energizing anything now. Bob AZ |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| lathe - metal or wood? | Woodworking | |||
| Help with HF 14" x 40" lathe | Metalworking | |||
| Help with HF 14" x 40" lathe | Metalworking | |||
| Jet vs Delta 14" lathe | Woodturning | |||
| Kelton Balancer Review Draft--long | Woodturning | |||
Linear Mode
