Can anyone point me in the right direction for an aluminum oxide
grinding wheel for one of the knockoff carbide grinders. I cannot find
one that has the same hole pattern as the silicon carbide wheels that
the grinder comes with.

Thanks, Steve

wrote:
Can anyone point me in the right direction for an aluminum oxide
grinding wheel for one of the knockoff carbide grinders. I cannot find
one that has the same hole pattern as the silicon carbide wheels that
the grinder comes with.

Thanks, Steve

What, like this one?

KBC# 1-704-368
http://www.kbctools.com/usa/main.cfm

Nope...Will not work. The hole in the wheel must me 1.25". -Steve

On 3 Dec 2005 21:42:50 -0800, "
wrote:

Nope...Will not work. The hole in the wheel must me 1.25". -Steve


Try KBC again,

www.KBCTOOLS.COM

and either

page 191

or

KBC part #

2-010-S61

They are the correct ones and with 1.25 center hole.

Problem is, those grinders don't use "green" for carbide, they use
diamond.

wrote:
Nope...Will not work. The hole in the wheel must me 1.25". -Steve


The hole is 1.25"

On 3 Dec 2005 19:02:55 -0800, "
wrote:

Can anyone point me in the right direction for an aluminum oxide
grinding wheel for one of the knockoff carbide grinders. I cannot find
one that has the same hole pattern as the silicon carbide wheels that
the grinder comes with.

Thanks, Steve


They are called "plate wheels". That may help your search

I get mine from one of the local machine shop supply companies

Gunner

"Pax Americana is a philosophy. Hardly an empire.
Making sure other people play nice and dont kill each other (and us)
off in job lots is hardly empire building, particularly when you give
them self determination under "play nice" rules.

Think of it as having your older brother knock the **** out of you
for torturing the cat." Gunner

" wrote:

Can anyone point me in the right direction for an aluminum oxide
grinding wheel for one of the knockoff carbide grinders. I cannot find
one that has the same hole pattern as the silicon carbide wheels that
the grinder comes with.

Thanks, Steve

MSC http://www.mscdirect.com has Norton wheels for about $80.

94035755 46 grit
99607152 60 grit
88791025 80 grit

Tove

wrote:
Can anyone point me in the right direction for an aluminum oxide
grinding wheel for one of the knockoff carbide grinders. I cannot find
one that has the same hole pattern as the silicon carbide wheels that
the grinder comes with.

Thanks, Steve

MSC has (or had) them. I bought some from them about a year ago.

Dan Mitchell
============