Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
FA: minarik DC motor controller
Minarik DC motor controller, good for up to 1/4 HP at 230 V, half that
at 115 V, tested and working I have a lot of these, put one only on e-bay here's the link http://cgi.ebay.com/ws/eBayISAPI.dll...tem=7569036962 this control is good for power feed servo motors, etc - it has a 1% load regulation, and is controlled with a simple 10K potentiometer. bill www.wbnoble.com |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
FA: minarik DC motor controller
On Fri, 02 Dec 2005 23:50:50 +0000, "William B Noble (don't reply to
this address)" wrote: Minarik DC motor controller, good for up to 1/4 HP at 230 V, half that at 115 V, tested and working I have a lot of these, put one only on e-bay here's the link http://cgi.ebay.com/ws/eBayISAPI.dll...tem=7569036962 this control is good for power feed servo motors, etc - it has a 1% load regulation, and is controlled with a simple 10K potentiometer. bill www.wbnoble.com Bill, I just scored 20+ new in the boxs 2hp, 3500 rpm treadmill motors. Two wire, rated for continious duty, variable speed. 110 or 130v, according to the boxes. Any interest in putting some packages together? Your controllers, my motors? Gunner "Pax Americana is a philosophy. Hardly an empire. Making sure other people play nice and dont kill each other (and us) off in job lots is hardly empire building, particularly when you give them self determination under "play nice" rules. Think of it as having your older brother knock the **** out of you for torturing the cat." Gunner |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FA: Minarik DC regenerative PWM variable speed drive NRGD05 | Metalworking | |||
FA: a couple of more (new) Minarik PWM DC drives | Metalworking | |||
fa: repaired Minarik DC SCR drive | Metalworking | |||
Minarik controllers anyone? | Metalworking | |||
FA -- Minarik DC motor controllers | Metalworking |